US Body Source is easy to relocate anywhere.

Close

 
 
                       

Close   

Page Tools  

Bookmark
. Print Page
. E-Mail Page

To order simply click listing.                           Order On-Line Anytime 24/7

    
68-74 Stock Hood Add a new scoop
for as little as  $50 w / purchase.
FNOH-03 $ 589 68-74 Body Shell - no floor NOY-8 $3899.
68-74 Cowl Induc. Hood 2" FNOH-4 $ 589. 68-74 Stock Hood Add a new scoop
for as little as  $50 w / purchase.
NOH-4 $ 319.
68-74 Cowl Induc. Hood 4" TNOH-68 $ 589. 68-74 Cowl Induc. Hood 2" NOH-6 $ 329.
68-74 L-88 Hood 3" FNOH-3 $ 649. 68-74 Cowl Induc. Hood 4"
Now On Sale Just $299.
NOH-46 $ 399.
68-74 Super Sport Hood FNOH-69 $ 569. 68-74 Super Sport Hood NOH-48 $ 429.
68-74 Tilt Front End FNOC-7 $1699. 68-74 L-88 Hood 3" NOH-5 $ 359.
68-74 Front Wheel Wells pr. FNOW-68P $ 299. 68-74 6" Dominator Hood NOH-46D $ 429.
        68-74 US BODY EXCLUSIVE
6.5" Aero Hood
NOH-8A $ 429.
68-74 One Piece Front End NOC-74 $1899.
68-74 Front Fenders pr. NOF-4P $ 698.
68-74 Doors pr. NOD-4P $ 698.
68-74 Trunk Lid NOT-3 $ 179.
  73-74 Hatch NOT-8 $ 269.
68-72 Front Bumper - shell NOB-5 $ 199.
73-74 Front Bumper - shell NOB-7 $ 199.
73-74 Rear  Bumper - shell NOB-8 $ 199.

All Items are American Made Fiberglass Components. Manufactured and shipped F.O.B. Riverview Florida 33578

 
68-74 Stock Hood
 68-74 Stock Hood  larger pic
 Heavy Duty Features:
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
Additional hold downs recommended.
 - Order Anytime, Click listing at top of page.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin aids in reduction of
    print-thru.
    Add a new scoop w / purchase. 
 
68-74 Cowl Induction Hood
 68-74 Cowl Induction 2" Hood  larger pic
 Heavy Duty Features:
 - Styled after the original Z-28 design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
Additional hold downs recommended.
 - Order Anytime, Click listing at top of page.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin
    Add a ram air isolator plate. 
 
Installed Photos
 
68-74 Aero Hood
 68-74 6.5" Aero Hood
 Race Weight Features:
 - Designed w/Pro-Stock style scoop for maximum
   ram air flow.
 - Full perimeter bracing & rear baffle installed.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Reinforced skin.
 - Order Anytime, Click listing at top of page.
 - Scoop comes closed. (Size 33"x6.5"x18")
 - Edges require sanding for desired fit.
 - One piece construction - Yes, it comes out of
    the mold this way!
    Add a ram air isolator plate. 
 
68-74 6" Dominator Hood
 68-74 6" Dominator Cowl Hood
 Race Weight Features:
 - Designed w/Dominator style scoop.
 - Full perimeter bracing & rear baffle installed.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Reinforced skin.
 - Order Anytime, Click listing at top of page.
 - Dominator scoop provides +/- 6" at rear
   & +/- 5" clearance at stock carb location.
 - 90 Edges require sanding for desired fit.
 - One piece construction - Yes, it comes out of
   the mold this way!
    Add a ram air isolator plate. 
 
68-74 L-88 Hood
 68-74 L-88 3.5" Hood Zoom! / Installed Photos
 Heavy Duty Features:
 - Styled after the original L-88 design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
Additional hold downs recommended.
 
 - Order Anytime, Click listing at top of page.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin.
    Add a ram air isolator plate. 
 
68-74 4" Cowl Techhood
 68-74 4" Cowl Induction Hood  larger pic
 Heavy Duty Features:
 - Cowl Induction style design. (3.5" Clearance)
   TECHHOOD™ design.
 - 90 edges on both sides help to maintain fender
   contours.
 
- Full inner frames - utilizes OEM hinge & latch.
   Additional hold downs recommended.
 - Fully lined - smooth gellcoated inner.

 - Order Anytime, Click listing at top of page.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin reduces "print thru".
 - Scoop and
baffel come closed.
   Add a ram air isolator plate.
 
 
Cowl Induction style design.









 68-74 Super Sport Hood

 Heavy Duty Features:
 - Super Sport style design. (+/- 2" Clearance)
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
Additional hold downs recommended.
    Add a ram air isolator plate. 

photo n/a

68-74 Front Fender  68-74 Front Fender
 Race Weight Features:
 - Smooth gray gellcoat exterior finish..
 - Fiberglass texture, Black lacquer inner finish.
 - Hood Jam holes
and attaching points
   must be opened for installation.
 - Mold flashing must be removed for finishing.
 - Order Anytime, Click listing at top of page.
 - No other reproduction fiberglass fenders come
   so complete.
 - Partial inner jam provides attach points only.
 - Not designed for hinge type hood.
 - Fiberglass race weight pin-on hood required.
 
68-74 One Piece Front End  
 
   Front End Features:
 -
Heavy Duty version - comes complete with hinge kit  
 - Grey exterior gellcoat finish can be easily sanded and
   prepared for finishing.
 - Smooth 90 roll into wheel well openings, generally
   extends in a full  ".
 - Headlight blanks require opening to install light bowl
   and trim.
 - Order Anytime, Click listing at top of page.
 - The units do come with mold flashing - which must be
   fared in before preparing for paint. 
 -
Front Ends do need the rear fender panel to be cut in order
   to hinge. They can be made to slide forward than tilt without
   cutting the fender, however, this depends on the tire size
   and will involve detailed planning and fabrication on the
   installers part.

 - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.
    Wheel wells cannot be completely attached to the front end as they will interfere with engine &
    firewall component, when hinging.


 - Light Weight Version - is intended for racing applications and does not come with a hinge kit.    
 - These unit generally only weigh in at approx 30#  +/- .  

 IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.

68-74 Body Shell

Rotate Body

Smooth gelcoat finish ! Smooth gelcoat finish !
                                                         68-74 Race Body Shell
 

  Please Note: We are unable to ship body shells. They must be picked up in person to avoid freight damage.

  When building a race vehicle you obviously want it as light as possible. So you cut out the floor pan -wheel wells & inner structure.....As far as the body all you are left with is an overweight, floppy shell held together with old factory spot welds and body lead. Our bodies are manufactured from extremely complex molds - which produce a rigid one piece unit. The roof, quarters & firewall are generally stiffened with the use of internal ribbing. In addition, your all new glass body can be made heavier or lighter (within reason) depending on your application.  Average body weight is only about 100#'s.

 As far as body work, you need to scuff off the mold flashing - block sand - prime and paint.  The great part about owning a rigid glass body - is that you'll never have to worry about rust. Once you apply your paint scheme that's it - just wash and wax.

  Installation is a snap!  Whether you are installing just the body or an entire package, the bodies attach at the rocker panels, tail pan, trunk jam, door jam, and front and rear window jams.  We also offer fiberglass wheel tubs, which can be glassed directly to your new body. (This is done by the installer).
 

Black lacquered fiberglass textured inner.
 68-72 Bumper

 Race Weight Features:
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Reinforced skin aids in reduction of print-thru.
 
Sandable gray gellcoated exterior finish.
 73-74 Bumper

 Race Weight Features:
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Reinforced skin aids in reduction of print-thru.
 
 68-74 Door
 Race Weight Features:
 - Detailed interior panel.
 - Will accept original handle, hinge & latching
   mechanism.
 - All holes come closed & must be opened for
   installation. 
 - Order Anytime, Click listing at top of page.
 - Available in Light Weight design only.
 - Strictly intended for Racing application only!
 - Fully gellcoated inner & outer surface.
 - Plastic windows required  attached to inner door
   frame.
Light Weight design
Fully gellcoated inner & outer surface.
68-74 Trunk Lid  68-74 Trunk Lid
 Race Weight Features:
 - Full perimeter bracing.
 - 90 edges on both sides help to maintain body
   contours.
 - Order Anytime, Click listing at top of page.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Reinforced skin aids in reduction of print-thru.
 
 73-74 Hatch
 Race Weight Features:
 - Full perimeter bracing.
 - Black lacquered fiberglass textured inner.
 - Order Anytime, Click listing at top of page.
 - Sandable gray gellcoated exterior finish.
 - Reinforced skin aids in reduction of print-thru.
73-74 Hatch
 68-74 Front Wheel Well
 Features:
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Order Anytime, Click listing at top of page.
 - Reinforced skin aids in reduction of print-thru.
68-74 Wheel Well

 


Phone Mon- Thurs 9am-2pm est   (352) 468-2203
FAX Orders can be sent 24/7 at (813)-671-7160

E-Mail us with your input anytime at customerservice@usbody.com

US Body Source Since 1987
8823 Van Fleet Road Riverview Florida 33578

U.S. Body Source inc. Proudly serving automotive enthusiasts since 1987 Copyright 1987 U.S.Body Source inc., usbody.com, dragglass.com, e-bodyparts.com, etc. The text and images in this and the afore mentioned sites may not be reproduced for commercial purposes  without express written permission from U.S.Body Source inc. The use of names and headings is for the sole purpose of identification. U.S.Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer. Items ship freight collect. Freight is not refundable. 30% Restocking on all returns. Please Read Our Policies!