photo gallery menu   81-88 Monte Carlo Stock Hood   print page

SHOW OFF YOUR VEHICLE. Send photos of your usbody or carhoods.com project, When we post them we will send you some bucks.

 


Hood Information


 Heavy Duty Perimeter Frame Hood: This 81-88 Monte Carlo Stock Hood has been manufactured as close to original factory specifications as possible. Today's advanced manufacturing techniques makes it possible to produce a straighter, more rigid part than those made in the 60's and 70's. You will also find it's fit, finish and functionality will give you what your missing for your restoration or performance project.
 
This hoods under support frame is about 10" wide around the perimeter of the under side of the hood. Steel inserts installed for easy installation.

 Light Weight Pin On Hood: This 81-88 Monte Carlo Stock Hood is solely designed for applications where weight reduction is an important factor for competition and winning is the #1 goal. The light weight pin-on design does not utilize either the hinge or latch, but requires the use of fasteners on all four sides.
 Our light weight hoods will scale in a few pounds heavier than competition parts made by others, however we feel that by adding a little more material, your new hood will maintain its fit and shape  indefinitely.  

 

 The inner finish is black lacquer  with no cross braces to get in the way.  This hood will use the original hinge. The surface finish is a sandable gray gellcoat, allowing for easier sanding and prep work.

<< Typical Heavy Duty hood inner.
 

 This hood is strong, straight and professionally braced for lift off use with a 9# high density foam which is fiberglass encased to provide maximum strength and durability, for years to come. 

<< Typical Pin On hood inner.

 Be sure to check over 2000 customer photos in our GIANT photo gallery.


Add A Scoop To Your Order


Go to hoood scoops.  

 Design your own custom hood! A major advantage to installing your own scoop, is you only need to cut a hole in the hood large enough for clearance and air flow, this creates a built in air box between the scoop and the hoods' surface. When installing a fiberglass scoop to a fiberglass hood you eliminate the potential delaminatation problem that often occurs when adding a fiberglass or plastic scoop to a steel hood.

Order your 81-88 Monte Carlo Stock Hood today!
Order on-line anytime.
1987 US Body Source inc. All photos are property of US Body Source inc. and may not be reproduced.
For a full line of stock replacement and custom body parts go to our main site www.usbody.com.