To order simply click listing. Order On-Line Anytime 24/7
Suburbans, Tahoes, Blazers, Crew Cabs & some
trucks - may
have the previous
"Truck Year Application Hood" - Go to the photos for positive I.D. of your
vehicle. Make sure you are ordering the correct
parts!
All Items are
American
Made
Fiberglass
Components. Manufactured
and shipped F.O.B. Hampton Florida 32044
88-98
Stock Hood
larger pic Heavy Duty Features:
- Smooth grey gellcoat
finish.
- Frames use existing Hinge & Latch.
- Fiberglass texture inner coated with Black
Lacquer. Add a new scoop w / purchase.
88-98
Indy 2" Cowl Induction Hood Installed Photos Heavy Duty Features:
- Smooth grey gellcoat
finish.
- Indy Cowl styling provides 2" clearance.
- Order Anytime, Click listing at top of page.
- Frames use existing Hinge & Latch.
- Fiberglass texture inner coated with Black
Lacquer.
88-98 3.5" Dominator™ Cowl Hood Heavy Duty Features:
larger pic
- Bolts Directly to the OEM hinge &
Latch.
- Hi-Rise design provides and additional
3 ½ clearance.
- Rear baffle comes closed & may be opened
for increase functional cowl air flow.
88-98 3.5" Dominator™ Cowl Inner Heavy Duty Features:
- Smooth Sandable gray Gellcoat
Inner
finish with steel anchors for both
hinge & latch.
- Order Anytime, Click listing at top of page. - Side 90° edges must be left long to provide maximum strength during shipping and
may need sanded for a correct fit.
88-98
Super Sport Hood Heavy Duty Features:
larger pic
- Fully Lined TECHHOOD™ design Bolts
Directly
to the OEM hinge & Latch.
- Additional hold
downs recommended.
- S.S. design provides an additional 2.5"
clearance.
- Rear Baffle & Front Scoop must be cut open to
be made functional.
88-98
Super Sport Inner Heavy Duty Features:
- Smooth Sandable gray Gellcoat Inner
finish with steel anchors for both
hinge & latch.
- Order Anytime, Click listing at top of page.
- Additional hold downs
recommended.
- Side 90° edges must be left long to provide
maximum strength during shipping and
may need sanded for a correct fit.
88-98
Ram Air II Hood Installed Photos Heavy Duty Features:
larger pic
- Fully Lined TECHHOOD™ design Bolts
Directly
to the OEM hinge & Latch.
- Additional hold
downs recommended.
- RA II styling provides an additional 2.5"
clearance.
- Rear Baffle & Front Scoop must be cut open to
be made functional.
88-98
Ram Air II Inner Installed Photos Heavy Duty Features:
- Smooth Sandable gray Gellcoat Inner
finish with steel anchors for both hinge & latch.
- Order Anytime, Click listing at top of page.
- Side 90° edges must be left long to provide
maximum strength during shipping and
may need sanded for a correct fit.
88-98 Front End
3.5" Dominator Note: The Heavy Duty version
of this front end utilizes the same inner liner as our TECHHOOD® shown above.
photo n/a
(All Units are
Interchangeable between the years - Chevy or GMC)
Front End
Features:
- Heavy Duty version - comes complete with hinge kit
- Grey exterior gellcoat finish can be easily sanded and
prepared for finishing.
- Order Anytime, Click listing at top of page. - Smooth 90° roll into wheel well openings, generally
extends in a full
¾". - The units do come with mold flashing - which must be
fared in before
preparing for paint.
- Pre-Split Front End models come with the lower
fender section (the part between the
door and tire) separate. It is manufactured with a tongue & groove
joint on both
the panel and the front end, to
help in closing
alignment.
- One Piece Front Endsdo need the rear fender panel to be cut in order to utilize the
hinge kit supplied.....They can be made to slide forward than tilt without
cutting the fender, however, this
depends on the tire size and will involve detailed planning and
fabrication on the installers part.
- The interior finish is Fiberglass texture - coated in black lacquer - it comes
without wheel wells.
Wheel wells cannot be completely attached to the front end as they will
interfere with engine &
firewall component, when hinging.
-
Light Weight Version - is
intended for racing applications and does not come with a hinge
kit.
- These unit generally only weigh in at approx 30# +/- .
- Pre-Split models are not available in Light Weight.
NOTE: Light Weight version truck racing components are
"Special Order" and Non
Returnable.
IMPORTANT - Please specify the type of racing that the unit will be used for, so we
may build and reinforce your unit accordingly. Units manufactured for "Mud Bog"
racing have a heavier roving on all edges to reduce the chance of tearing (under to stress
of impact and mud load) and usually weigh 10 - 15# more than a Drag Racing unit. Units manufactured for "Sand Drag"
or "Baja" style racing are built so as to be midway between the Street Drag and
the Mud Bog units.
99-02 Ram
Air II Hood
larger pic Installed Photos Heavy Duty Features:
- Fully Lined TECHHOOD™ design Bolts
Directly
to the OEM hinge & Latch.
- Additional hold
downs recommended.
- RAII styling provides an additional 2.5"
clearance.
- Rear Baffle & Front Scoop must be cut open to
be made functional.
- Order Anytime, Click listing at top of page.
99-06 Ram
Air II Hood - GMC
larger pic Installed Photos Heavy Duty Features:
- Fully Lined TECHHOOD™ design Bolts
Directly
to the OEM hinge & Latch.
- Additional hold downs
recommended.
- RAII styling provides an additional 2.5"
clearance.
- Rear Baffle & Front Scoop must be cut open to
be made functional.
- Order Anytime, Click listing at top of page.
