US Body Source is easy to relocate anywhere.

Close

 
 
                       

Close   

Page Tools  

Bookmark
. Print Page
. E-Mail Page

To order simply click listing.                           Order On-Line Anytime 24/7

       Special Order Only
83-88 Tilt Front End FRBI-1 $1699. 83-88 Stock Hood Add a new scoop
for as little as  $50 w / purchase.
FFT-13 $ 379.
83-88 Dominator 2" Hood TFRH-83 $ 589. 83-88 Dominator 2" Hood FFT-183 $ 379.
89-92 Dominator 2" Hood TFRH-89 $ 589. 83-88 One Piece Front End FFT-67R $1199.
89-92 Mach-I Hood TFRH-90 $ 589. 89-92 Stock Hood Add a new scoop
for as little as  $50 w / purchase.
FFT-13B $ 379.
        89-92 Dominator 2" Hood FFT-923 $ 349.
        89-92 Mach-I Hood FFT-189 $ 379.
The Following Parts have been Modified for easier mounting to a  83-93 Ranger LWB frame:
1940 All Parts Listed Below FRBP-40 $8499.
1940 Cab w/Ranger Floor FRBA-40 $6499.
1940 One Piece Front End FRBI-40 $1849.
1940 OPFE w/sep. Hood FRBI-40H $1849.
1940 Doors pr. FRBD-40 $ 998.
1940 Bed Box w/floor FRBB-40 $3299.
1940 Stepside Fenders pr. FRBF-40 $ 778.
1940 Running Boards FRBF-42 $ 558.

All Items are American Made Fiberglass Components. Manufactured and shipped F.O.B. Riverview Florida 33578

83-88 Front End

 

                          83-88 Front End

   Front End Features:
 -
Heavy Duty version - comes complete with hinge kit  
 - Grey exterior gellcoat finish can be easily sanded and
   prepared for finishing.
 - Order Anytime, Click listing at top of page.
 - Smooth 90 roll into wheel well openings, generally
   extends in a full  ".
 - Order Anytime, Click listing at top of page.
 - The units do come with mold flashing - which must be
   fared in before preparing for paint. 



 - One Piece Front Ends do need the rear fender panel to be cut in order to utilize the hinge kit
   supplied.....They can be made to slide forward than tilt without cutting the fender, however, this
   depends on the tire size and will involve detailed planning and fabrication on the installers part.
 - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.
    Wheel wells cannot be completely attached to the front end as they will interfere with engine &
    firewall component, when hinging.

 - Light Weight Version - is intended for racing applications and does not come with a hinge kit.    
 - These unit generally only weigh in at approx 30#  +/- .  
 - Pre-Split models are not available in Light Weight.

 
NOTE:  When ordering Light Weight version truck racing components are
             "Special Order" and Non Returnable. 

 IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Mud Bog" racing have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact and mud load) and usually weigh 
10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Mud Bog units.

83-88 2" Dominator Hood

 83-88 2" Dominator™ Cowl 
larger pic
Installed Photos
 Heavy Duty Features:
 - Bolts Directly to the OEM hinge & Latch*.
 - Hi-Rise design provides and additional
   2" clearance - once opened.
 - Rear baffle comes closed & may be opened 
   for increase functional cowl air flow.

 - Additional hold downs recommended.
Smooth gelcoat finish !

 83-88 2" Dominator™ Cowl Inner

 Heavy Duty Features:
 - Smooth Sandable gray Gellcoat Inner 
    finish with steel anchors for both hinge &
    latch.
 - Order Anytime, Click listing at top of page.
 - Side  90 edges must be left long to provide
   maximum strength during shipping and may
   need sanded for a correct fit.
 
89-92 2" Dominator Hood
 89-92  2" Dominator™ Cowl  larger pic
Installed Photos
 Heavy Duty Features:
 - Bolts Directly to the OEM hinge & Latch*.
 - Hi-Rise design provides and additional
   2" clearance - once opened.
 - Rear baffle comes closed & may be opened 
   for increase functional cowl air flow.

 - Additional hold downs recommended.
 Smooth Sandable gray Gellcoat Inner 
 89-92  2" Dominator™ Cowl Inner
 Heavy Duty Features:
 - Smooth Sandable gray Gellcoat Inner 
    finish with steel anchors for both hinge &
    latch.
 - Order Anytime, Click listing at top of page.
 - Side  90 edges must be left long to provide
   maximum strength during shipping and may
   need sanded for a correct fit.
 
89-92 Mach-1 Hood
 89-92 Mach-1 Hood  larger pic
 Installed Photos
 Heavy Duty Features:
 - Fully Lined TECHHOOD™ design Bolts Directly
   to the OEM hinge & Latch*.
 - Mach-1 styling provides an additional 2" 
   clearance.
  - Rear Baffle & Front Scoops must be cut open
    to be made functional.

 - Additional hold downs recommended.
Smooth gelcoat finish !
 89-92 Mach-1 Hood Inner
 Heavy Duty Features:
 - Smooth Sandable gray Gellcoat Inner 
    finish with steel anchors for both hinge &
    latch.
 - Order Anytime, Click listing at top of page.
 - Side 90 edges must be left long to provide
   maximum strength during shipping and 
   may need sanded for a correct fit.

FAX Orders can be sent 24/7 at (813)-671-7160

E-Mail us with your input anytime at customerservice@usbody.com

US Body Source Since 1987
8823 Van Fleet Road Riverview Florida 33578

U.S. Body Source inc. Proudly serving automotive enthusiasts since 1987 Copyright 1987 U.S.Body Source inc., usbody.com, dragglass.com, e-bodyparts.com, etc. The text and images in this and the afore mentioned sites may not be reproduced for commercial purposes  without express written permission from U.S.Body Source inc. The use of names and headings is for the sole purpose of identification. U.S.Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer. Items ship freight collect. Freight is not refundable. 30% Restocking on all returns. Please Read Our Policies!