US Body Source is easy to relocate anywhere.

Close

 
 
                       

Close   

Page Tools  

Bookmark
. Print Page
. E-Mail Page

To order simply click listing.                           Order On-Line Anytime 24/7

       Special Order Only
72-78 Stock Hood Add a new scoop
for as little as  $50 w / purchase.
FDRH-77 $ 589. 72-78 Stock Hood Add a new scoop
for as little as  $50 w / purchase.
FDT-7 $ 389.
72-78 Tilt Front End FDRI-77 $1799. 72-78 One Piece Front End FDT-27 $1499.
72-80 Tilt Front 3.5" Cowl Ind. FDRI-77C $1799. 72-80 OPFE  3.5" Cowl Induc. FDT-27C $1499.
72-80 Tilt Front R/T Style FDRI-77R $1799. 72-80 OPFE R/T Style FDT-27R $1499.
72-93 Cowl Induction Hood 3" TDRH-90 $ 689. 79-80 Stock Hood Add a new scoop
for as little as  $50 w / purchase.
FDT-8 $ 389.
72-93 R/T Hood TDRH-91 $ 689. 72-93 Cowl Induction Hood 3"
Now On Sale Just $389.
FDT-31 $ 449.
79-80 Tilt Front End FDRI-80 $1799. 72-93 R/T Hood FDT-31R $ 389.
79-80 Tilt Front 3.5" Cowl Ind. FDRI-77C $1799. 79-80 One Piece Front End FDT-28 $1499.
72-80 Tilt Front R/T Style FDRI-77R $1799. 72-80 OPFE  3.5" Cowl Induc. FDT-27C $1499.
72-93 Cowl Induction Hood 3 TDRH-90 $ 689. 72-80 OPFE R/T Style FDT-27R $1499.
72-93 R/T Hood TDRH-91 $ 689. 81-93 Stock Hood Add a new scoop
for as little as  $50 w / purchase.
FDT-9 $ 389.
81-93 Tilt Front End FDRI-84 $1799. 72-93 Cowl Induction Hood 3"
Now On Sale Just $389.
FDT-31 $ 449.
81-93 Tilt Front 3.5" Cowl Ind. FDRI-84C $1799. 72-93 R/T Hood FDT-31R $ 389.
81-93 One Piece Front End FDT-29 $1499.
81-93 OPFE  3.5" Cowl Induc. FDT-29C $1499.

All Items are American Made Fiberglass Components. Manufactured and shipped F.O.B. Riverview Florida 33578

72-78 Front End 79-80 Front End

72-78 Front End  Installed Photos

79-80 Front End 

Smooth gelcoat finish ! R/T
72-80 Front End 3.5" Cowl Induction  
Note: The Heavy Duty version of this front end utilizes the same inner liner as our TECHHOOD® shown below.
Requires the use of '79 and newer cowl panel.
72-80 Front End R/T Style
Note: The Heavy Duty version of this front end utilizes the same inner liner as our TECHHOOD® shown below.
Requires the use of '79 and newer cowl panel.
   72-93 Front End Features:
 -
Heavy Duty version - comes complete with hinge kit  
 - Grey exterior gellcoat finish can be easily sanded and
   prepared for finishing.
 - Order Anytime, Click listing at top of page.
 - Smooth 90° roll into wheel well openings, generally
   extends in a full  ¾".
 - The units do come with mold flashing - which must be
   fared in before preparing for paint. 



 - One Piece Front Ends do need the rear fender panel to be cut in order to utilize the hinge kit
   supplied.....They can be made to slide forward than tilt without cutting the fender, however, this
   depends on the tire size and will involve detailed planning and fabrication on the installers part.
 - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.
    Wheel wells cannot be completely attached to the front end as they will interfere with engine &
    firewall component, when hinging.

                             
81-93 Front End

 

 81-93 Front End   

 

Heavy Duty version - comes complete with hinge kit.

81-93 Front End 3.5" Cowl Induction  
Note: The Heavy Duty version of this front end utilizes the same inner liner as our TECHHOOD® shown below.


 - Light Weight Version - is intended for racing applications and does not come with a hinge kit.    
 - These unit generally only weigh in at approx 30#  +/- .  
 - Order Anytime, Click listing at top of page.

 
NOTE:  When ordering Light Weight version truck racing components are "Special Order" and 
            Non Returnable. 

 IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Mud Bog" racing have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact and mud load) and usually weigh 
10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Mud Bog units.

Smooth Gellcoat Finish Non - Tech Hood inner Smooth Gellcoat Finish
 72-78  Stock Hood  larger pic
 Heavy Duty Features:
 - Smooth
gray gellcoat finish.
 - Frames use existing Hinge &
   Latch.
 - Fiberglass texture inner coated
   with Black Lacquer.

 - Additional hold downs
   recommended.
 - Add a new scoop w / purchase.
 72-93  Inner View 
 - 90° edges come long - may
   need sanded  for a correct fit.
 79-93 Stock Hood 
 Heavy Duty Features:
 - Smooth
gray gellcoat finish.
 - Frames use existing Hinge &
   Latch.
 - Fiberglass texture inner coated
   with Black Lacquer.
 - Additional hold downs
   recommended.
 - Add a new scoop w / purchase.
fdt-31.gif (13429 bytes)

72-93  3"  Cowl Induction
   Installed Photos
 Heavy Duty Features: larger pic
 - Bolts Directly to the OEM hinge & Latch*.
 - Hi-Rise design provides and additional
   3" clearance.
 - Rear baffle comes closed & may be opened 
   for increase functional cowl air flow.
 - Additional hold downs recommended.
Smooth Inner

 72-93 3" Cowl Induction Inner 
 Heavy Duty Features:
 - Smooth Sandable gray Gellcoat Inner 
    finish with steel anchors for both hinge & latch.
 - Order Anytime, Click listing at top of page.
 - Side  90° edges must be left long to provide
   maximum strength during shipping and may
   need sanded for a correct fit.
 - 79-93 Cowl Panel Required for use on 72-78 
   models.

R/T
 72-93 R/T Hood  larger pic
 Heavy Duty Features:
 - Fully Lined TECHHOOD™ design Bolts Directly
   to the OEM hinge & Latch*.
 - R/T styling provides an additional 2" 
   clearance.
  - Rear Baffle & Front Scoop must be cut  open

     to be made functional.
 
 - Additional hold downs recommended.
Smooth gelcoat finish !

 72-93 R/T Inner 
 Heavy Duty Features:
 - Smooth Sandable gray Gellcoat Inner 
    finish with steel anchors for both hinge & latch.
 - Order Anytime, Click listing at top of page.
 - Side  90° edges must be left long to provide
   maximum strength during shipping and may
   need sanded for a correct fit.
 - 79-93 Cowl Panel Required for use on 72-78 
   models.


FAX Orders can be sent 24/7 at (813)-671-7160

E-Mail us with your input anytime at customerservice@usbody.com

US Body Source Since 1987
8823 Van Fleet Road Riverview Florida 33578

U.S. Body Source inc. Proudly serving automotive enthusiasts since 1987 © Copyright 1987® U.S.Body Source inc., usbody.com, dragglass.com, e-bodyparts.com, etc. The text and images in this and the afore mentioned sites may not be reproduced for commercial purposes  without express written permission from U.S.Body Source inc. The use of names and headings is for the sole purpose of identification. U.S.Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer. Items ship freight collect. Freight is not refundable. 30% Restocking on all returns. Please Read Our Policies!