|
|
|
To order simply click listing. Order On-Line Anytime 24/7 |
|
|
|
|
 |
|
All Items are
American
Made
Fiberglass
Components. Manufactured
and shipped F.O.B. Hampton Florida 32044 |
|
|
55-75 CJ-5 |
76-83 CJ-5
(84" W.B.)
Installed Photos |
76-85 CJ-7 (93.4" W.B.)
Installed Photos |
CJ-5, 7 Body w / Floor
This new
double wall design could be the strongest CJ body
ever made.
It features:
- Triple
reinforced floor, aluminum (not steel) reinforced firewall, door hinge, hood
hinge and windshield
hinge locations.
- Order Anytime, Click listing at top of
page.
- Newly
designed one piece floor - is structurally ribbed in the rear floor area.
- Double wall construction
allowing for maximum box section strength and provides a smooth
sandable grey gellcoat finish on both inside and outside panels.
- All tubs feature a large
firewall drip flange and a smooth 90° roll into the wheel well.
- Under floor supports using marine
grade pressure treated lumber (not Balsa wood - which is a
common trade practice.)
- All models are engineered to
accept original OEM hardtop and doors along with most all original
equipment |
|
|
|
|
We take pride in the fact that we use extremely
heavy reinforcing in the tub floors. Kevlar® reinforcement is
also used in the front body mount perches and rear corners of the tubs. The closed
tailgate CJ-7 model even features a simulated tailgate - providing for more strength over
a smooth rear section. |
|
The crates are prefabricated and forkliftable. Once
crated the tubs are securely banded in place -prior to shipping. This type of
packaging nearly eliminates any chance of damage during shipping. (Don't let
your CJ arrive in a cardboard box). |
76-85 Tailgate
Heavy Duty Features:
- Stock bolt-on design
- Smooth inner & Outer finish
- 6 Anchors preinstalled for
quick easy mounting. |
|
72-85 Stock
Hood
larger pic
Installed Photos
Heavy Duty Features:
- Steel plates installed for use
with OEM latch.
- Fully lined TECHHOOD™
designed with smooth inner
finish.
- Add a new scoop w / purchase. |
72-85 Power Bulge Hood
larger pic
Installed Photos
Heavy Duty Features:
- Liner must be cut open to
access the functional cold air
chamber, this will provide an
additional 2" clearance. |
72-85 Aero
Hood
Installed Photos
Heavy Duty Features:
- Liner must be cut open to
access the functional cold air
chamber, this will provide an
additional 5" clearance. |
86-96 Stock
Hood
larger pic
Heavy Duty Features:
- Steel plates installed for use
with OEM latch.
- Fully lined TECHHOOD™
designed with smooth inner
finish.
- Add a new scoop w / purchase. |
86-96
Power Bulge Hood
larger pic
Heavy Duty Features:
- Liner must be cut open to
access the functional cold air
chamber, this will provide an
additional 2" clearance. |
86-96
Hood Inner |
97-06 Stock
Hood
larger pic
Heavy Duty Features:
- Steel plates installed for use
with OEM latch.
- Fully lined TECHHOOD™
designed with smooth inner
finish.
- Add a new scoop w / purchase. |
97-06 Power Bulge
larger pic
Installed Photos
Heavy Duty Features:
- Liner must be cut open to
access the functional cold air
chamber, this will provide an
additional 2" clearance.
|
97-02
Hood Inner |
 |
72-85
Front Fender
Heavy Duty Features:
- Gellcoated inner Wheel Well.
- Stock Outer
Design.
- Drilling Required for
installation. |
|
|
 |
|
HOT NEW
!
CJ-5 & CJ-7 Warrior™ Package
Installed
Pic CJ5
Installed
Pic CJ7
- Order Anytime, Click listing at top of page.
It only take about 20 minutes to modify a CJ-5 or CJ-7 allowing the mud and
dirt to stay where it belongs. . outside the vehicle. The Warrior™ Kit bolts
directly to the outside of the vehicle and will provide a clean rust-free outer
finish. This can be useful in coving up that nasty lower tide line (of rust that
is). The additional 4" tire coverage that the Warrior™ Kit provides will
cover most 34 x 12.5" tires on early models and 34 x 10.5" tires on newer wide
track models. |
Kit Includes:
- Left & Right Side Body Panels
- 3M® Two Sided Adhesive
- 1 Box Stainless Steel Fasteners |
|
|
|
|
