All Items are
American
Made
Fiberglass
Components. Manufactured
and shipped F.O.B. Hampton Florida 32044
56 Cab Short Wheel Base 110" Installed Photos
Heavy Duty Features: - One Piece Outer shell construction - with a few well hidden mold seams.
- Smooth, easy to prep and paint, gray sandable exterior gellcoat finish.
- Aluminum plate reinforced firewall & door hinge areas provides the necessary
strength for
proper support of factory doors & hardware.
- Marine Grade Pressure treated floor support beams are sealed into the fiberglass
and covered
with black lacquer finish. - The unit arrives bare without dash, doors or any
mechanical or electrical devices.
- Headliner is supplied and comes with a smooth pintable gellcoat interior
finish.
(Comes separately and requires professional installation.)
- Detailed cowl vent allows for quick, easy opening. . . there is even a gutter to
drain the
collecting water
- Light Weight Model comes with out floor and firewall Race Cab
Photos This unit is solely
intended for serious racing applications. Tube chassis and metal interior work is required. Approx. weight 50#.
-
Drag-Package Includes: Race Weight Cab, Front End, Doors &
Bedsides or Stepside fenders. Please e-mail or call us after placing
your order. Reference your order number and specify your choice of hood
and bedside or fender choice by part number. You MUST specify your type
of racing so the parts can be made accordingly. Race weight parts only. Note:
Factory installed floor braces may need
to be trimmed or removed for desired fit.
Cabs - although strong, straight, rust free &
reliable - are not the project for the average "Joe". They are intended
for the serious "Ground Up Builder" who has the time, money & experience to
do the job correctly.
All safety concerns must be taken up with the
chassis shop involved with the project.
Once finished these cabs look exceptional and should just about last forever,
however, sit down and Please give some serious thought before ordering........We prefer
that our customers be confident & educated in the amount of work required to complete
this project and secure in the choice that you make. Please Note:
We are unable to ship cab shells. They must be picked up in person to
avoid freight damage.
53-56 Front End Heavy Duty Features:
- Smooth gray gellcoat
exterior finish.
- Fiberglass texture, Black
lacquer inner finish.
- Mold flashing must be removed
for finishing.
53-56 Front Fender Heavy Duty Features:
- Smooth gray gellcoat
exterior finish.
- Fiberglass texture, Black
lacquer inner finish.
- Hood Jam holes and attaching
points must be opened for
installation.
- Mold flashing must be removed
for finishing.
53-56
Stock Hood Heavy Duty Features:
- Smooth gray gellcoat
exterior finish.
- Complete with rolled side
edges.
- Only available in Light Weight
Lift Off design.
- Add a new scoop for as little as $50 w / purchase.
53-56
Front End
Features:
- Heavy Duty version - comes complete with hinge kit
- Grey exterior gellcoat finish can be easily sanded and
prepared for finishing.
- Smooth 90° roll into wheel well openings, generally
extends in a full
¾".
- The units do come with mold flashing - which must be
fared in before
preparing for paint.
- Pre-Split Front End models come with the lower
fender section (the part between the
door and tire) separate. It is manufactured with a tongue & groove
joint on both
the panel and the front end, to
help in closing
alignment.
-
Light Weight Version - is
intended for racing applications and does not come with a hinge
kit.
- These unit generally only weigh in at approx 30# +/- .
- Pre-Split models are not available in Light Weight.
NOTE: When ordering Light Weight version truck racing components are
"Special Order" and Non
Returnable.
IMPORTANT - Please specify the type of racing that the unit will be used for, so we
may build and reinforce your unit accordingly. Units manufactured for "Mud Bog"
racing have a heavier roving on all edges to reduce the chance of tearing (under to stress
of impact and mud load) and usually weigh 10 - 15# more than a Drag Racing unit. Units manufactured for "Sand Drag"
or "Baja" style racing are built so as to be midway between the Street Drag and
the Mud Bog units.
53 Grill Blank Heavy Duty Features:
- Smooth gray gellcoat finish.
- Detailed face area.
56
Door - Hinge Type Heavy Duty Features:
- Smooth gray gellcoat finish both inside and out.
- Accepts original hinge, latch & regulator hardware.
- Double wall posts support upper window and track.
- Windows come blanked in and must be opened during
installation.
- Coremat® reinforced outer skin reduces "print thru".
- Power window kits can be used to install one piece
glass.
- Original felts can be epoxied in the door post and side
track.
- Door is supplied bare with no glass, mechanism, tracks
or hardware. Installed Photos
53-79 Stepside
Fender Heavy Duty Features:
- Smooth gray gellcoat exterior
finish - Fiberglass textured
Black Lacquer inner.
- Smooth 90° roll into wheel well
- Rear flange holes come closed
and require back drilling for
correct alignment.
53-56 Wheel Well Heavy Duty Features:
- Smooth gray gellcoat finish.
- Original rib design.
- Acid Resistant - Rust free fiberglass construction.
Phone
Mon- Thurs 9am-2pm est (352) 468-2203
FAX Orders can be sent 24/7 at
(352) 468-2164
