Page Tools  

  47-68 Cab
Heavy Duty Features:
 - One Piece Outer shell construction - with a few well hidden mold seams.
 - Smooth, easy to prep and paint, gray sandable exterior gellcoat finish.
 - Aluminum plate reinforced firewall & door hinge areas provides the necessary strength for 
   proper support of factory doors & hardware.
 - Marine Grade Pressure treated floor support beams are sealed into the fiberglass and covered 
   with black lacquer finish. 

47-68 Cab cont'd  - The unit arrives bare without dash, doors or any mechanical or electrical devices.  - Headliner is supplied and comes with a smooth paintable gellcoat interior finish.     (Comes  separately  and requires professional installation.)   - Detailed cowl vent allows for quick, easy opening. . . there is even a gutter to drain the     collecting water  - Light Weight Model comes with out floor and firewall - This unit is solely intended for serious     racing applications. Tube chassis and metal interior work is required.    Approx. weight 50#                    Note: Factory installed floor braces may need to be trimmed or removed for desired fit.  Cabs - although strong, straight, rust free & reliable - are not the project for the average "Joe". They are intended for the serious "Ground Up Builder" who has the time, money & experience to do the job correctly.           All safety concerns must be taken up with the chassis shop involved with the project.    Once finished these cabs look exceptional and should just about last forever, however, sit down and Please give some serious thought before ordering........We prefer that our customers be confident & educated in the amount of work required to complete this project and secure in the choice that you make.  Please Note: We are unable to ship cab shells. They must be picked up in person to avoid freight damage.

47-68 Hood Set - 4 pc.
 Heavy Duty Features:
 - Smooth Gray gellcoat finish.
 - 90° flange in center - requires piano style hinge.
 - Side panel openings come closed - and require opening to
   exhaust engine heat.
 - Sanding & Drilling required - hardware NOT included.
 

 47-68 Radiator Shell
 Heavy Duty Features:
 - Smooth gray gellcoat finish.
 - Clean stock design.
 - Reinforced for daily use. 

 47-68 Door - Hinge Type
 Heavy Duty Features:
 - Smooth gray gellcoat finish both inside and out.
 - Accepts original hinge, latch & regulator hardware.
 - Double wall posts support upper window and track.
 - Windows come blanked in and must be opened during
    installation.
 - Coremat® reinforced outer skin reduces "print thru".
 - Power window kits can be used to install one piece glass.
 - Original felts can be epoxied in the door post and side track.
 - Door is supplied bare with no glass, mechanism, tracks or
   hardware.

 47-68 Front Fender
 Heavy Duty Features:
 - Smooth gray gellcoat exterior
   finish - Black Lacquer
   fiberglass texture inner.
 - Rear flange holes come closed
   and require back drilling for
   correct alignment.