All Items are
American
Made
Fiberglass
Components. Manufactured
and shipped F.O.B. Hampton Florida 32044
3 Window Cab
47-53 Cab Heavy Duty Features: - One Piece Outer shell construction - with a few well hidden mold seams.
- Smooth, easy to prep and paint, gray sandable exterior gellcoat finish.
- Aluminum plate reinforced firewall & door hinge areas provides the necessary
strength for
proper support of factory doors & hardware.
- Marine Grade Pressure treated floor support beams are sealed into the fiberglass
and covered
with black lacquer finish.
5
Window Cab
47-53 Cab cont'd - The unit arrives bare without dash, doors or any
mechanical or electrical devices.
- Headliner is supplied and comes with a smooth paintable gellcoat interior
finish.
(Comes separately and requires professional installation.)
- Detailed cowl vent allows for quick, easy opening. . . there is even a gutter to
drain the
collecting water
- Light Weight Model comes with out floor and firewall - This unit is solely
intended for serious
racing applications. Tube chassis and metal interior work is required.
Approx. weight 50#
-
Drag-Package Includes: Race Weight Cab, Front End, Doors &
Bedsides or Stepside fenders. Please e-mail or call us after placing
your order. Reference your order number and specify your choice of
hood and bedside or fender choice by part number. You MUST specify
your type of racing so the parts can be made accordingly. Race
weight parts only.
Note:
Factory installed floor braces may need
to be trimmed or removed for desired fit.
Cabs - although strong, straight, rust free &
reliable - are not the project for the average "Joe". They are intended
for the serious "Ground Up Builder" who has the time, money & experience to
do the job correctly.
All safety concerns must be taken up with the
chassis shop involved with the project.
Once finished these cabs look exceptional and should just about last forever,
however, sit down and Please give some serious thought before ordering........We prefer
that our customers be confident & educated in the amount of work required to complete
this project and secure in the choice that you make. Please Note:
We are unable to ship cab shells. They must be picked up in person to
avoid freight damage.
47-53 Front End
Features:
- Heavy Duty version - comes complete with hinge kit
- Grey exterior gellcoat finish can be easily sanded and
prepared for finishing.
- Order Anytime, Click listing at top of page. - Smooth 90° roll into wheel well openings, generally
extends in a full
¾". - Headlight blanks require opening to install light bowl
and trim.
- The units do come with mold flashing - which must be
fared in before
preparing for paint.
- This model fits 47-54 trucks but requires the use of
the 47-53 grill shell.
-
Light Weight Version - is
intended for racing applications and does not come with a hinge
kit.
- These unit generally only weigh in at approx 30# +/- .
NOTE:
When ordering Light Weight version truck racing components are
"Special Order" and Non
Returnable.
IMPORTANT - Please specify the type of racing that the unit will be used for, so we
may build and reinforce your unit accordingly. Units manufactured for "Mud Bog"
racing have a heavier roving on all edges to reduce the chance of tearing (under to stress
of impact and mud load) and usually weigh 10 - 15# more than a Drag Racing unit. Units manufactured for "Sand Drag"
or "Baja" style racing are built so as to be midway between the Street Drag and
the Mud Bog units.
47-54 Stock Hood Features:
- Smooth gray gellcoat
exterior finish.
- Order Anytime, Click listing at top.
- Complete with rolled side
edges and center trim.
- Only available in Light
Weight Lift Off design.
- Add a new scoop w / purchase. Installed Photos
47-54 Stepside
Fender Features:
- Smooth gray gellcoat exterior
finish - Black Lacquer
fiberglass texture inner.
- Smooth 90° roll into wheel well
- Order Anytime, Click listing at top.
- Rear flange holes come closed
and require back drilling for
correct alignment. Installed Photos
47-54
Stepside Bed (Short Wheel Base Box - 115" w.b.) (Long Wheel Base Box
122.7" w.b.) Heavy Duty Features:
- Double panel side walls, with a smooth gray gellcoat inner and outer finish.
- Hollow sealed stake pocket - can be opened if desired for original appearance.
- Design for use and abuse with heavy Marine Grade PT under floor
reinforcements - which can
support the same weight load as the original bed.
- Gellcoated Fiberglass floors - recessed 3/4" to allow for the installation of
"Aftermarket" Bed
Wood Kits.
- Black lacquer over fiberglass texture underneath the bed floor and on the forward
side of the back
splash.
- Side flange is angled and does not have the curled design of the original
bed (Due to compound
curve & fiberglass mold limitations.)
- Installation time (after removal of original box ) 1-2 hours.
- Order Anytime, Click listing at top of page.
Note:
Factory installed floor braces may need to
be trimmed or removed for desired fit.
To install - simply drill thru the bed and the under floor reinforcements and thru
bolt it in place with O.D washers. It may be necessary to drill a new mounting hole
through the existing frame. Drilling - sanding and possible notching of under floor
braces may be required for correct installation of your NEW and
IMPROVED, RUST FREE, DENT
FREE bed assembly. (Ground wire required for electrical).
47-54
Door - Hinge Type
Installed Photos Heavy Duty Features:
- Smooth gray gellcoat finish both inside and out.
- Accepts original hinge, latch & regulator hardware.
- Double wall posts support upper window and track.
- Windows come blanked in and must be opened during
installation.
- Order Anytime, Click listing at top of page.
- Coremat® reinforced outer skin reduces "print thru".
- Power window kits can be used to install one piece glass.
- Original felts can be epoxied in the door post and side track.
- Door is supplied bare with no glass, mechanism, tracks or
hardware.
