78-87 Stock Hood
Heavy Duty Features:
- 90 edges on both sides help to
maintain fender contours.
- Full perimeter inner frames - utilizes
OEM hinge & latch.
Additional hold downs recommended.
- Black lacquered fiberglass textured
inner finish.
- Sandable gray gellcoated exterior
finish.
- Coremat® reinforced skin aids in
reduction of print-thru.
-
Add a new scoop for as little as $50 w /
purchase. |
78-87 Cowl
Induct. 2" Hood
Heavy Duty Features:
- Styled after the original Z-28 design.
- 90 edges on both sides help to
maintain fender contours.
- Full perimeter inner frames - utilizes
OEM hinge & latch.
Additional hold downs recommended.
- Black lacquered fiberglass textured
inner finish.
- Coremat® reinforced skin.
-
You
can add a ram air isolator plate
during check out.
Installed Photos |
78-87
6.5" Aero Hood
Race Weight Features:
- Designed w/Pro-Stock style scoop
for maximum ram air flow.
- Installed perimeter bracing baffle.
- Black fiberglass textured inner.
- Sandable gray gellcoated exterior.
- Reinforced skin.
- Scoop comes closed. (33"x6.5"x18")
- Edges require sanding for desired fit.
- One piece construction - Yes, it
comes out of the mold this way!
-
You
can add a ram air isolator plate
during check out. |
78-87
7" Torpedo Hood
Race Weight Features:
- Designed w/Pro-Stock style scoop
for maximum ram air flow.
- Installed perimeter bracing baffle.
- Black fiberglass textured inner.
- Sandable gray gellcoated exterior.
- Reinforced skin.
- Scoop comes closed. (33"x6.5"x18")
- Edges require sanding for desired fit.
- One piece construction - Yes, it
comes out of the mold this way!
-
You
can add a ram air isolator plate
during check out.
|
78-87 Cowl
Induct. 3.5" Hood
Heavy Duty Features:
- Styled after the original Z-28 design.
- 90 edges on both sides help to
maintain fender contours.
- Fully Lined TECHHOOD™ design
- Full perimeter inner frames - utilizes
OEM hinge & latch.
Additional hold downs recommended.
- Smooth Gellcoated. paintable inner
finish.
- Coremat® reinforced skin.
-
You
can add a ram air isolator plate
during check out.
|
Installed Photos
|
78-87 Super
Sport Hood
Heavy Duty Features:
- Styled after the original Z-28 design.
- 90 edges on both sides help to
maintain fender contours.
- Fully Lined TECHHOOD™ design
- Full perimeter inner frames - utilizes
OEM hinge & latch.
Additional hold downs recommended.
- Smooth Gellcoated. paintable inner
finish, Scoop & liner come closed.
- Full Open inner chamber provides 2"
of additional clearance.
- Coremat® reinforced skin.
|
Installed Photos
|
|
78-87 W-30 Hood
Heavy Duty Features:
- Styled after the original 442 design. (Scoops
come closed)
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner frames - utilizes OEM hinge
& latch.
Additional hold downs recommended.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Coremat® reinforced skin.
|
 |
|
78-87 Front Fender
Race Weight Features:
- Smooth gray gellcoat exterior finish..
- Fiberglass texture, Black lacquer inner finish.
- Hood Jam holes & attaching points must be opened for installation
- Mold flashing must be removed for finishing.
- No other reproduction fiberglass fenders come so complete.
- Partial inner jam provides attach points only.
- Not designed for hinge type hood.
- Fiberglass race weight pin-on hood required. |
78-87
Bumpers
Race Weight Features:
- Black lacquered fiberglass
textured inner.
- Sandable gray gellcoated
exterior finish.
- Reinforced skin aids in
reduction of print-thru. |
|
|
 |
78-87 Pro
Front End
Race Weight Features:
- Grey exterior gellcoat finish can be easily sanded and prepared for finishing.
- Smooth 90° roll into wheel well openings, generally extends in a full
¾".
- The interior finish is Fiberglass texture - coated in black lacquer - it comes without
wheel wells.
Light Weight Version -
is intended for racing applications and does not come with a hinge
kit.
- These unit generally only weigh in at approx 30# +/- .
- Pro-Package Includes: Pro Front end, Choice of hood, 2 Doors &
Choice of trunk. Please e-mail us after placing your order. Reference
your order number and specify your choice of hood and trunk by part
number. Race weight parts only.
IMPORTANT - Please specify the type of racing that the unit will be used for, so we
may build and reinforce your unit accordingly. Units manufactured for "Street
Racing" have a heavier roving on all edges to reduce the chance of tearing (under to
stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.
Units manufactured for "Sand Drag" or "Baja" style racing are built so
as to be midway between the Street Drag and the Street Race units.
|
 |
78-87 Trunk Lid
Race Weight Features:
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Reinforced skin. |
|
 |
 |
78-87 Door
Race Weight Features:
- Smooth interior panel. (As Shown Above)
- Will accept original handle, hinge & latching
mechanism.
- All holes come closed & must be opened for
installation. |
- Available in Light Weight design only.
- Strictly intended for Racing application only!
- Fully gellcoated inner & outer surface.
- Plastic windows required attached to
inner
door frame.
Installed Photos |
|
