All Items are
American
Made
Fiberglass
Components. Manufactured
and shipped F.O.B. Hampton Florida 32044
75-79 Stock Hood
Heavy Duty Features:
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner frames - utilizes OEM hinge
& latch.
Additional hold downs required.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Coremat® reinforced skin aids in
reduction of
print-thru. Add a new scoop w / purchase.
75-79 Stock
Hood w/cowl panel
Race Weight Features:
- Full perimeter inner bracing.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Reinforced skin aids in reduction of
print-thru. Add a new scoop w / purchase.
75-79 Cowl Induction 2" Hood
larger pic
Heavy Duty Features:
- Styled after the original Z-28 design.
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner frames - utilizes OEM hinge
& latch.
Additional hold downs required.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Coremat® reinforced skin. Add a ram air isolator plate. Installed Photos
75-79 Cowl Induction 4" Hood
Heavy Duty Features:
- Styled after the original Z-28 design.
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner frames - utilizes OEM hinge
& latch.
Additional hold downs required.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Coremat® reinforced skin. Add a ram air isolator plate.
75-79
6.5" Aero Hood
Race Weight Features:
- Designed w/Pro-Stock style scoop for
maximum ram air flow.
- Full perimeter bracing & rear baffle installed.
- Black lacquered fiberglass textured inner.
- Order Anytime, Click listing at top of page. Add a ram air isolator plate.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Reinforced skin.
- Scoop comes closed. (Size 33"x6.5"x18")
- Edges require sanding for desired fit.
- One piece construction - Yes, it comes out of
the mold this way!
75-79 Front End
Front End
Features:
- Heavy Duty version - comes complete with hinge kit
- Grey exterior gellcoat finish can be easily sanded and
prepared for finishing.
- Smooth 90° roll into wheel well openings, generally
extends in a full
¾".
- Headlight blanks require opening to install light bowl
and trim.
- Order Anytime, Click listing at top of page.
- The units do come with mold flashing - which must be
fared in before
preparing for paint.
- Front Ends do need the rear fender panel to be cut in order
to
hinge. They can be made to slide forward than tilt without
cutting the fender, however, this depends on the tire size
and will involve detailed planning and
fabrication on the
installers part.
-
Light Weight Version - is
intended for racing applications and does not come with a hinge
kit.
- These unit generally only weigh in at approx 30# +/- .
IMPORTANT - Please specify the type of racing that the unit will be used for, so we
may build and reinforce your unit accordingly. Units manufactured for "Street
Racing" have a heavier roving on all edges to reduce the chance of tearing (under to
stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.
Units manufactured for "Sand Drag" or "Baja" style racing are built so
as to be midway between the Street Drag and the Street Race units.
75-79 Front Fender Race Weight Features:
- Smooth grey gellcoat exterior finish..
- Fiberglass texture, Black lacquer inner finish.
- Hood Jam holes
and attaching
points must be opened for installation.
- Mold flashing must be removed for finishing.
- No other reproduction fiberglass fenders
come so complete.
- Partial inner jam provides attach points only.
- Not designed for hinge type hood.
- Fiberglass race weight pin-on hood required.
75-79 Trunk Lid
Race Weight Features:
- Full perimeter bracing.
- 90 edges on both sides help to maintain body
contours.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Reinforced skin aids in reduction of print-thru.
75-79 Bumpers
Race Weight Features:
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Reinforced skin aids in reduction of print-thru
