US Body Source is easy to relocate anywhere.

Close

 
 
                       

Close   

Page Tools  

Bookmark
. Print Page
. E-Mail Page

To order simply click listing.                           Order On-Line Anytime 24/7

    

All hoods listed below are for the 4 light model unless stated otherwise.

75-81 Stock Hood Add a new scoop
for as little as  $50 w / purchase.
FMZH-1 $ 549. 75-81 2+2 Body - no floor MZY-75 $3899.
75-81 Cowl Induct. Hood 2" FMZH-2 $ 559. 75-81 Stock Hood Add a new scoop
for as little as  $50 w / purchase.
MZH-1 $ 299.
75-81 2+2 One Piece Front FMZI-75 $1699. 75-81 Cowl Induct. Hood 2" MZH-2 $ 299.
75-81 2+2 Front End w/o Hood FMZI-76 $1699. 75-81 Cowl Induct. Hood 5"
Now On Sale Just $299.
MZH-25 $ 399.
        75-81 US BODY EXCLUSIVE
6.5" Aero Hood
MZH-1A $ 449.
75-81 US BODY EXCLUSIVE
7.5" Torpedo Hood
MZH-7A $ 449.
75-81 Stock Hood / 2 light MZH-3 $ 359.
75-81 Cowl Ind. Hood 2"/2 light MZH-4 $ 359.
75-81 2+2 Pro Front End MZC-75 $1399.
75-81 Pro Package MZC-75P $2099.
75-81 2+2 OPFE MZC-77 $1399.
75-81 Front Fenders pr. MZF-77P $ 698.
75-81 Doors pr. MZD-1P $ 698.
75-81 Hatch MZT-3 $ 299.

All Items are American Made Fiberglass Components. Manufactured and shipped F.O.B. Riverview Florida 33578

75-81Stock Hood - 2 light

 75-81 Stock
Hood
- 2 light
 Race Weight Features:
 - Styled after the original design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner bracing.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Order Anytime, Click listing at top of page.
 - Reinforced skin.
   Add a new scoop w / purchase.
75-81 2" Cowl Hood - 2 light
 75-81 2" Cowl Induction Hood - 2 light
 Race Weight Features:
 - Styled after the original Z-28 design. (Only 1"
   actual clearance.)
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner bracing.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Order Anytime, Click listing at top of page.
 - Reinforced skin.

    Add a ram air isolator plate. 

Stock Hood
 75-81 Stock Hood - 4 light  larger pic
 Heavy Duty Features:
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
Additional hold downs required.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Order Anytime, Click listing at top of page.
 - Coremat
reinforced skin aids in reduction of
    print-thru.
    Add a new scoop w / purchase.

75-81 2" Cowl Hood - 4 light
 75-81 2" Cowl Induction Hood- 4 light  larger pic
 Heavy Duty Features:
 - Styled after the original Z-28 design. (Only 1"
   actual clearance.)
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
Additional hold downs required.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Order Anytime, Click listing at top of page.
 - Coremat
reinforced skin.

    Add a ram air isolator plate. 

5" Cowl
 75-81 5" Cowl Induction Hood
 Race Weight Features:
 - Styled after the original Z-28 design. (Only 4"
   actual clearance.)
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner bracing.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Order Anytime, Click listing at top of page.
 - Reinforced skin.

    Add a ram air isolator plate. 

75-81 Aero Hood
 75-81 6.5" Aero Hood
 Race Weight Features:
 - Designed w/Pro-Stock style scoop.
 - Full perimeter bracing & rear baffle installed.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Order Anytime, Click listing at top of page.
 - Reinforced skin.
 - Scoop comes closed. (Size 33"x6.5"x18")
 - Edges require sanding for desired fit.
 - One piece construction - Yes, it comes out of
    the mold this way!

    Add a ram air isolator plate. 

75-81 Torpedo Hood
 75-81 7.5" Torpedo Hood
 Race Weight Features:
 - Designed w/Pro-Stock style scoop.
 - Full perimeter bracing & rear baffle installed.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Order Anytime, Click listing at top of page.
 - Reinforced skin.
 - Scoop comes closed. (Size 44"x7"x18")
 - Edges require sanding for desired fit.
 - One piece construction - Yes, it comes out of
    the mold this way!

    Add a ram air isolator plate. 
75-81 Hatch

 75-81 Hatch

 Race Weight Features:
 - Full perimeter bracing.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Order Anytime, Click listing at top of page.
 - Reinforced skin aids in reduction of print-thru.
   
75-81 2+2 Pro Front End 75-81 2+2 One Piece Front End

         
  75-81  2+2 Front End - No Hood                             75-81 2+2 One Piece Front End
   Front End Features:
 -
Heavy Duty version - does not come with a hinge kit or installation hardware.

 - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.
 - Smooth 90 roll into wheel well openings, generally extends in a full  ".
 - Headlight blanks require opening to install light bowl and trim.
 - The units do come with mold flashing - which must be fared in before preparing for paint. 
 - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.
    Wheel wells cannot be completely attached to the front end as they will interfere with engine &
    firewall component, when hinging.
 - Order Anytime, Click listing at top of page.
 - Light Weight Version - is intended for racing applications and does not come with a hinge kit or
   installation hardware..    
 - These unit generally only weigh in at approx 30#  +/- .  
 - Pro-Package Includes: Pro Front end, Choice of hood, 2 Doors & Choice of trunk. Please e-mail us after placing your order. Reference your order number and specify your choice of hood and trunk by part number. Race weight parts only.
Front End Installation Tips
 Easy On
 Fish Mouth Design.

 A good idea a customer came up with - was to use fish mouth tubing - a large piece mounted to the frame rail and a somewhat smaller one glassed to the front end itself.  When sliding the front end on it not only self aligns it secure the front end and fasteners are only needed in the rear.

 Tilting One Piece Front Ends
 Most of the work to tilt a full fendered front end can be accomplished at the drawing table. First you will need a photo of the side of the vehicle. draw an outline of its' front end on tracing paper. Cut the outline drawing and lay it over the photo. With the use of a pin, determine where the hinge placement should be (The pin acting as the hinging point.) be sure that your paper model when tilting, does not have the fender hitting the tire or the grill hitting the ground.
 To get more lift
and clearance while tilting, a double hinge
can be fabricated and used. For either double or single hinges, you must start by fiberglassing a 1 x 1 steel bar into the front end, just above and in front of the hinge point. 

 Make sure, before glassing the bar in that a pad is welded on the end to make it more stable. 
 For single hinge mechanism
- weld or bolt an other plate coming off of the frame rail and drill the 1/2" hole in the same location.  With the use of a 1/2" bolt & fiber lock nut ,as your hinge, the front end should pivot properly.  Whatever you do
TAKE YOUR TIME
 For a double hinge mechanism
, weld an oval plate off of the bar in the front end (previously installed) angled down and behind the hinge point.  Cut an oval plate to bolt to the frame horn and add 2 stop bolts to limit the travel. Doing your best to make your assembly look like the animation to the right. It is best to use stainless steel bolts and cotter pin type lock nuts, for a secure installation...and again whatever you do TAKE YOUR TIME!

 IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.
75-81 Body

                                    75-81 2+2 Body

  Please Note: We are unable to ship body shells. They must be picked up in person to avoid freight damage.

  When building a race vehicle you obviously want it as light as possible. So you cut out the floor pan -wheel wells & inner structure.....As far as the body all you are left with is an overweight, floppy shell held together with old factory spot welds and body lead. Our bodies are manufactured from extremely complex molds - which produce a rigid one piece unit. The roof, quarters & firewall are generally stiffened with the use of internal ribbing. In addition, your all new glass body can be made heavier or lighter (within reason) depending on your application.  Average body weight is only about 100#'s.

Detailed Rear

  As far as body work, you need to scuff off the mold flashing - block sand - prime and paint.  The great part about owning a rigid glass body - is that you'll never have to worry about rust. Once you apply your paint scheme that's it - just wash and wax.

  Installation is a snap!  Whether you are installing just the body or an entire package, the bodies attach at the rocker panels, tail pan, trunk jam, door jam, and front and rear window jams.  We also offer fiberglass wheel tubs, which can be glassed directly to your new body. (This is done by the installer).


FAX Orders can be sent 24/7 at (813)-671-7160

E-Mail us with your input anytime at customerservice@usbody.com

US Body Source Since 1987
8823 Van Fleet Road Riverview Florida 33578

U.S. Body Source inc. Proudly serving automotive enthusiasts since 1987 Copyright 1987 U.S.Body Source inc., usbody.com, dragglass.com, e-bodyparts.com, etc. The text and images in this and the afore mentioned sites may not be reproduced for commercial purposes  without express written permission from U.S.Body Source inc. The use of names and headings is for the sole purpose of identification. U.S.Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer. Items ship freight collect. Freight is not refundable. 30% Restocking on all returns. Please Read Our Policies!