US Body Source is easy to relocate anywhere.

Close

 
 
                       

Close   

Page Tools  

Bookmark
. Print Page
. E-Mail Page

To order simply click listing.                           Order On-Line Anytime 24/7

    
69-70 Stock Hood Add a new scoop
for as little as  $50 w / purchase.
TMUH-69 $ 589. 69-70 Stock Hood Add a new scoop
for as little as  $50 w / purchase.
MUH-3 $ 389.
69-70 EXCLUSIVE Smooth Inner
4.50 Dominator Hood
TMUH-69D4 $ 649. 69-70 4.50 Dominator Hood
On-Sale Just $299.
MUH-69D4 $ 499.
69-70 EXCLUSIVE Smooth Inner
3" Dominator Hood
TMUH-70 $ 649. 69-70 3" Dominator Hood
On-Sale Just $299.
MUH-35 $ 389.
69-70 Smooth sealed air chamber
2.5" Boss 429 Hood
TMUH-69B $ 649. 69-70 2.5" Boss 429 Hood
On-Sale Just $299.
MUH-69B $ 449.
69-70 Stock Hood w/cowl panel
On-Sale Just $299.
MUH-3C $ 359.
69-70 '69 Pro Front End  MUC-69 $1599.
69-70 '69 Pro Package MUC-69P $2299.
69-70 Doors pr. MUD-69P $ 698.
          69-70 Trunk Lid - fastback MUT-5 $ 199.

All Items are American Made Fiberglass Components. Manufactured and shipped F.O.B. Riverview Florida 33578

69-70 Stock hood
 69-70 Stock Hood  larger pic
 Heavy Duty Features:
 - 90 edges on both sides help to maintain fender
   contours.
 - Full inner frames - utilizes OEM hinge
   and latch.
Additional hold downs recommended.
 
- Fully lined - smooth gellcoated inner.
 - Sandable gray gellcoated exterior finish.
 - Order Anytime, Click listing at top of page.
 - Coremat
reinforced skin aids in reduction of
    print-thru.
    Add a new scoop w / purchase. 

69-70 3" Dominator Cowl Induction Hood
Full inner frame
 69-70 3" Dominator™ Cowl Hood  larger pic
 Heavy Duty Features:
 - Dominator™ style design. (3" Clearance)
 - 90 edges on both sides help to maintain fender
   contours.
 
- Full inner frames - utilizes OEM hinge
   and latch. Additional hold downs recommended.
 - Fully lined - smooth gellcoated inner.

 - Sandable gray gellcoated exterior finish.
 - Order Anytime, Click listing at top of page.
 - Coremat
reinforced skin reduces "print thru".
 - Scoop and Inner liner come closed - opening
    required for clearance.
69 Style Pro Front End


                        69-70 69 Style Pro Front End                 
Installed Photos

   Front End Features:
 - Light Weight Version - is intended for racing applications and does not come with a hinge kit or
   installation hardware..    
 - These unit generally only weigh in at approx 30#  +/- .  
 - Order Anytime, Click listing at top of page.
 - Pro-Package Includes: Pro Front end, Choice of hood, 2 Doors & Choice of trunk. Please e-mail us after placing your order. Reference your order number and specify your choice of hood and trunk by part number. Race weight parts only.
Front End Installation Tips
 Easy On
 Fish Mouth Design.

 A good idea a customer came up with - was to use fish mouth tubing - a large piece mounted to the frame rail and a somewhat smaller one glassed to the front end itself.  When sliding the front end on it not only self aligns it secure the front end and fasteners are only needed in the rear.

 Tilting One Piece Front Ends
 Most of the work to tilt a full fendered front end can be accomplished at the drawing table. First you will need a photo of the side of the vehicle. draw an outline of its' front end on tracing paper. Cut the outline drawing and lay it over the photo. With the use of a pin, determine where the hinge placement should be (The pin acting as the hinging point.) be sure that your paper model when tilting, does not have the fender hitting the tire or the grill hitting the ground.
 To get more lift
and clearance while tilting, a double hinge
can be fabricated and used. For either double or single hinges, you must start by fiberglassing a 1 x 1 steel bar into the front end, just above and in front of the hinge point. 

 Make sure, before glassing the bar in that a pad is welded on the end to make it more stable. 
 For single hinge mechanism
- weld or bolt an other plate coming off of the frame rail and drill the 1/2" hole in the same location.  With the use of a 1/2" bolt & fiber lock nut ,as your hinge, the front end should pivot properly.  Whatever you do
TAKE YOUR TIME
 For a double hinge mechanism
, weld an oval plate off of the bar in the front end (previously installed) angled down and behind the hinge point.  Cut an oval plate to bolt to the frame horn and add 2 stop bolts to limit the travel. Doing your best to make your assembly look like the animation to the right. It is best to use stainless steel bolts and cotter pin type lock nuts, for a secure installation...and again whatever you do TAKE YOUR TIME!

 IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.

69-70 Fastback Trunk Lid



 69-70 Fastback Trunk Lid

 Race Weight Features:
 - Full perimeter bracing.
 - 90 edges on both sides help to maintain body
   contours.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Order Anytime, Click listing at top of page.
 - Reinforced skin aids in reduction of print-thru.

 69-70 Door
 Race Weight Features:
 - Detailed interior panel.
 - Will accept original handle, hinge & latching
   mechanism.
 - All holes come closed & must be opened for
   installation. 
 - Available in Light Weight design only.
 - Order Anytime, Click listing at top of page.
 - Strictly intended for Racing application only!
 - Fully gellcoated inner & outer surface.
 - Plastic windows & aluminum top post required
   attached to inner door frame.
        Installed Photos


FAX Orders can be sent 24/7 at (813)-671-7160

E-Mail us with your input anytime at customerservice@usbody.com

US Body Source Since 1987
8823 Van Fleet Road Riverview Florida 33578

U.S. Body Source inc. Proudly serving automotive enthusiasts since 1987 Copyright 1987 U.S.Body Source inc., usbody.com, dragglass.com, e-bodyparts.com, etc. The text and images in this and the afore mentioned sites may not be reproduced for commercial purposes  without express written permission from U.S.Body Source inc. The use of names and headings is for the sole purpose of identification. U.S.Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer. Items ship freight collect. Freight is not refundable. 30% Restocking on all returns. Please Read Our Policies!