All Items are
American
Made
Fiberglass
Components. Manufactured
and shipped F.O.B. Riverview Florida 33578
68 Stock Hood
larger pic
Heavy Duty Features:
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner frames - utilizes OEM hinge
(Original striker plate must be installed from the
metal hood for use with latch.)
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Coremat® reinforced skin aids in
reduction of
print-thru. Add a new scoop w / purchase. Installed Photos
69-70 Stock Hood
larger pic
Heavy Duty Features:
- 90 edges on both sides help to maintain fender
contours. No extension provisions.
- Full perimeter inner frames - utilizes OEM hinge
(Original striker plate must be installed from the
metal hood for use with latch.)
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Coremat® reinforced skin aids in
reduction of
print-thru. Add a new scoop w / purchase.
69-70 W-30
Hood
larger pic
Heavy Duty Features:
- 90 edges on both sides help to maintain fender
contours. No extension provisions.
- Full perimeter inner frames - utilizes OEM hinge
(Original striker plate must be installed from the
metal hood for use with latch.)
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Coremat® reinforced skin aids in
reduction of
print-thru.
- Air Box formed in - scoops come closed. Installed Photos
69-70 Cowl
Induction 4" Hood
Heavy Duty Features:
- 90 edges on both sides help to maintain fender
contours. No extension provisions.
- Full perimeter inner frames - utilizes OEM hinge
(Original striker plate must be installed from the
metal hood for use with latch.)
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Coremat® reinforced skin aids in
reduction of
print-thru. Add a ram air isolator plate. Installed Photos
71-72 Stock Hood
Heavy Duty Features:
- 90 edges on both sides help to maintain fender
contours. No extension provisions.
- Full perimeter inner frames - utilizes OEM hinge
(Original striker plate must be installed from the
metal hood for use with latch.)
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Coremat® reinforced skin aids in
reduction of
print-thru. Add a new scoop w / purchase.
71-72 Cowl Induction
4" Hood
larger pic
Heavy Duty Features:
- 90 edges on both sides help to maintain fender
contours. No extension provisions.
- Full perimeter inner frames - utilizes OEM hinge
(Original striker plate must be installed from the
metal hood for use with latch.)
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Coremat® reinforced skin aids in
reduction of
print-thru. Add a ram air isolator plate.
71-72 W-30 Hood
larger pic
Heavy Duty Features:
- 90 edges on both sides help to maintain fender
contours. No extension provisions.
- Full perimeter inner frames - utilizes OEM hinge
(Original striker plate must be installed from the
metal hood for use with latch.)
- Gray lacquered fiberglass inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Coremat® reinforced skin aids in
reduction of
print-thru.
- Air Box formed in - scoops come closed. Installed Photos
68-72
Front Fenders Installed PhotosInstalled Photos Race Weight Features:
- Smooth gray gellcoat exterior finish..
- Fiberglass texture, Black lacquer inner finish.
- Hood Jam holes
and attaching points must be opened for installation.
- Mold flashing must be removed for finishing.
- No other reproduction fiberglass fenders come so complete.
- Partial inner jam provides attach points only.
- Not designed for hinge type hood.
- Order Anytime, Click listing at top of page.
- Fiberglass race weight pin-on hood required.
- Inner jam may vary from
photo.
1 W-30 clip in stock.
Cash and carry price
1/2 off $749.
Customer pick up only
Call m-w 9-2 for info. 1352-468-2203
Front
End Features:
- Heavy Duty version - does not come with a hinge kit or
installation hardware.
- Grey exterior gellcoat finish can be easily sanded and prepared for finishing.
- Smooth 90° roll into wheel well openings, generally extends in a full
¾".
- Headlight blanks require opening to install light bowl and trim.
- The units do come with mold flashing - which must be fared in before
preparing for paint.
- The interior finish is Fiberglass texture - coated in black lacquer - it comes
without wheel wells.
Wheel wells cannot be completely attached to the front end as they will
interfere with engine &
firewall component, when hinging.
- Order Anytime, Click listing at top of page.
-
Light Weight Version - is
intended for racing applications and does not come with a hinge
kit or
installation hardware..
- These unit generally only weigh in at approx 30# +/- .
Front End
Installation Tips
Easy On
Fish Mouth Design.
A good idea a customer came up with
- was to use fish mouth tubing - a large piece mounted to the frame rail
and a somewhat smaller one glassed to the front end itself. When
sliding the front end on it not only self aligns it secure the front end
and fasteners are only needed in the rear.
Tilting One Piece Front Ends
Most of the work to tilt a full
fendered front end can be accomplished at the drawing table. First you
will need a photo of the side of the vehicle. draw an outline of
its' front end on tracing paper. Cut the outline drawing and lay it
over the photo. With the use of a pin, determine where the hinge
placement should be (The pin acting as the hinging point.) be sure
that your paper model when tilting, does not have the fender hitting the
tire or the grill hitting the ground.
To get more lift
and clearance while
tilting, a double hinge
can be fabricated and used. For either double
or single hinges, you must start by fiberglassing a 1 x 1 steel bar into
the front end, just above and in front of the hinge point.
Make sure, before glassing the bar in that a pad is welded on the end to
make it more stable.
For single hinge mechanism - weld or bolt
an other plate coming off of the frame rail and drill the 1/2" hole in
the same location. With the use of a 1/2" bolt & fiber lock nut ,as
your hinge, the front end should pivot properly. Whatever you do
TAKE YOUR TIME!
For a double hinge mechanism, weld an oval plate
off of the bar in the front end (previously installed) angled down and
behind the hinge point. Cut an oval plate to bolt to the frame
horn and add 2 stop bolts to limit the travel. Doing your best to make your
assembly look
like the animation to the right. It is best to use stainless steel bolts and
cotter pin type lock nuts, for a secure installation...and again
whatever you do TAKE YOUR TIME!
IMPORTANT - Please specify the type of racing that the unit will be used for, so we
may build and reinforce your unit accordingly. Units manufactured for "Street
Racing" have a heavier roving on all edges to reduce the chance of tearing (under to
stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.
Units manufactured for "Sand Drag" or "Baja" style racing are built so
as to be midway between the Street Drag and the Street Race units.
70-72 Door
Race Weight Features:
- Detailed interior panel.
- Will accept original handle, hinge & latching
mechanism.
- All holes come closed & must be opened for
installation.
- Available in Light Weight
design only.
- Order Anytime, Click listing at top of page. - Strictly intended for Racing application only!
- Fully gellcoated inner & outer surface.
- Plastic windows required attached to
inner door
frame.
70 Bumpers
Race Weight Features:
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish. - Order Anytime, Click listing at top of page. - Reinforced skin aids in reduction of print-thru.
