69-72 Stock Hood
larger pic
Heavy Duty Features:
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner frames - utilizes OEM hinge
& latch.
Additional hold downs recommended.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Order Anytime, Click listing at top of page.
- Coremat® reinforced skin aids in
reduction of
print-thru.
Add a new scoop w / purchase.
|
69-72 6-Pack Hood
larger pic
Heavy Duty Features:
- Styled after the original 6-Pack 3" design.
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner frames - utilizes OEM hinge
& latch.
Additional hold downs recommended.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Order Anytime, Click listing at top of page.
- Coremat® reinforced skin.
Add a ram air isolator plate.
|
|
69-72 6.5"
Aero Hood
Race Weight Features:
- Designed w/Pro-Stock style scoop.
- Full perimeter bracing & rear baffle installed.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Order Anytime, Click listing at top of page.
- Reinforced skin.
- Scoop comes closed. (Size 33"x6.5"x18")
- Edges require sanding for desired fit.
- One piece construction - Yes, it comes out of
the mold this way!
Add a ram air isolator plate.
|
73-76 Stock
Hood
Heavy Duty Features:
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner frames - utilizes OEM hinge
& latch.
Additional hold downs recommended.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Order Anytime, Click listing at top of page.
- Coremat® reinforced skin aids in
reduction of
print-thru.
Add a new scoop w / purchase.
|
73-76 6-Pack Hood
larger pic
Heavy Duty Features:
- Styled after the original 6-Pack 3 3/4" design.
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner frames - utilizes OEM hinge
& latch.
Additional hold downs recommended.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Order Anytime, Click listing at top of page.
- Coremat® reinforced skin.
Add a ram air isolator plate.
|
73-76 6.5"
Aero Hood
Race Weight Features:
- Designed w/Pro-Stock style scoop.
- Full perimeter bracing & rear baffle installed.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Order Anytime, Click listing at top of page.
- Reinforced skin.
- Scoop comes closed. (Size 33"x6.5"x18")
- Edges require sanding for desired fit.
- One piece construction - Yes, it comes out of
the mold this way!
Add a ram air isolator plate.
|
70-76 Front Fender
Features:
- Smooth gray gellcoat exterior finish..
- Fiberglass texture, Black lacquer inner finish.
- Hood Jam holes, Light plug and attaching points must be opened for installation.
- Mold flashing must be removed for finishing.
- No other reproduction fiberglass fenders come so complete.
- Order Anytime, Click listing at top of page.
|
67-76 Door
Race Weight Features:
- Detailed interior panel.
- Will accept original handle, hinge & latching
mechanism.
- All holes come closed & must be opened for
installation.
- Available in Light Weight design only.
- Strictly intended for Racing application only!
- Fully gellcoated inner & outer surface.
- Plastic windows & aluminum top post
required
attached to inner door frame.
- Order Anytime, Click listing at top of page.
|
 |
|
|
|
|
|
70-72
Pro Front End
-
Light
Weight Version - is
intended for racing applications and
does not come with a hinge kit.
- These unit generally only weigh in at approx 30# +/- .
- Grey exterior gellcoat finish can be easily sanded and
prepared for finishing.
- Smooth 90° roll into wheel well openings, generally extends
in a full ¾".
- Headlight blanks require opening to install light bowl and
trim.
- The units do come with mold flashing - which must be
fared in before preparing for paint.
- Order Anytime, Click listing at top of page.
-
Pro-Package Includes: Pro Front end, Choice of hood, 2 Doors &
Choice of trunk. Please e-mail us after placing your order.
Reference your order number and specify your choice of hood and
trunk by part number. Race weight parts only.
IMPORTANT
- Please specify the type of racing that the unit will be used for,
so we may build and reinforce your unit accordingly. Units
manufactured for "Street Racing" have a heavier roving on
all edges to reduce the chance of tearing (under to stress of
impact) and usually weigh 10 - 15# more than a Drag Racing
unit. Units manufactured for "Sand Drag" or
"Baja" style racing are built so as to be midway between
the Street Drag and the Street Race units. |
|
