Page Tools  

                                                67-68 Race Body Shell    Installed Photos

  Please Note: We are unable to ship body shells. They must be picked up in person to avoid freight damage.

  When building a race vehicle you obviously want it as light as possible. So you cut out the floor pan -wheel wells & inner structure.....As far as the body all you are left with is an overweight, floppy shell held together with old factory spot welds and body lead. Our bodies are manufactured from extremely complex molds - which produce a rigid one piece unit. The roof, quarters & firewall are generally stiffened with the use of internal ribbing. In addition, your all new glass body can be made heavier or lighter (within reason) depending on your application.  Average body weight is only about 100#'s.

                                                                  Installed Photos
 As far as body work, you need to scuff off the mold flashing - block sand - prime and paint.  The great part about owning a rigid glass body - is that you'll never have to worry about rust. Once you apply your paint scheme that's it - just wash and wax.

  Installation is a snap!  Whether you are installing just the body or an entire package, the bodies attach at the rocker panels, tail pan, trunk jam, door jam, and front and rear window jams.  We also offer fiberglass wheel tubs, which can be glassed directly to your new body. (This is done by the installer).

     67-68 Front End                                                    69 Front End    Installed Photos
                                                                                
 Race Weight Features:
 - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.
 - Smooth 90° roll into wheel well openings, generally extends in a full  ¾".
 - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.
 - These unit generally only weigh in at approx 30#  +/- .  
 - Pro-Package Includes: Pro Front end, Choice of hood, 2 Doors & Choice of trunk. Please e-mail us after placing your order. Reference your order number and specify your choice of hood and trunk by part number. Race weight parts only.

 IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit. Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.

Installed Photos
 You can add a ram air isolator plate
    during check out.

67-69 Trunk Lid  Race Weight Features:   - Black lacquered fiberglass     textured inner.   - Sandable gray gellcoated     exterior finish.   - Reinforced skin.
	Installed Photos

 Doors                                                         67-68 Door                                    69 Door
 Race Weight Features:
 - Detailed interior panel.
 - Will accept original handle, hinge & latching mechanism.
 - All holes come closed & must be opened for installation. 
 - Available in Light Weight design only.
 - Strictly intended for Racing application only!
 - Fully gellcoated inner & outer surface.
 - Plastic windows required  attached to inner door frame.