65 Stock
Hood
Race Weight Features:
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter bracing.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Order Anytime, Click listing at top of page.
- Reinforced skin aids in reduction of print-thru.
Add a new scoop w / purchase. |
65 Trunk Lid
Race Weight Features:
- 90 edges on both sides help to maintain body
contours.
- Full perimeter bracing.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Order Anytime, Click listing at top of page.
- Reinforced skin aids in reduction of print-thru. |
|
|
 |
 |
64-65 Door
Race Weight Features:
- Smooth interior panel.
- Will accept original handle, hinge & latching
mechanism.
- All holes come closed & must be opened for
installation.
|
- Order Anytime, Click listing at top of page.
- Available in Light Weight design only.
- Strictly intended for Racing application only!
- Fully gellcoated inner & outer surface.
- Plastic windows & aluminum top post
required
attached to inner door frame.
|
|
65
Front Bumper
Race Weight Features:
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Order Anytime, Click listing at top of page.
- Reinforced skin aids in reduction of print-thru.
- Outer Shell only - NOT intended for collision
purposes.
|
65 Rear
Bumper
Race Weight Features:
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Order Anytime, Click listing at top of page.
- Reinforced skin aids in reduction of print-thru.
- Outer Shell only - NOT intended for collision
purposes.
|
 |
65 Pro
Front End
- Light
Weight Version - is intended for racing
applications and does not
come with a hinge kit.
- These unit generally only weigh in at approx 30# +/- .
- Order Anytime, Click listing at top of page.
- Grey exterior gellcoat finish can be easily sanded and prepared for finishing.
- Smooth 90° roll into wheel well openings, generally extends in a full
¾".
- Headlight blanks require opening to install light bowl and trim.
- The units do come with mold flashing - which must be fared in before
preparing for paint.
IMPORTANT - Please specify the type of racing that the unit will be used for, so we
may build and reinforce your unit accordingly. Units manufactured for "Street
Racing" have a heavier roving on all edges to reduce the chance of tearing (under to
stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.
Units manufactured for "Sand Drag" or "Baja" style racing are built so
as to be midway between the Street Drag and the Street Race units. |
|
