|
|
|
Listings, part numbers and prices.
To order simply click listing. |
|
|
|
|
 |
|
All Items are
American
Made
Fiberglass
Components. Manufactured
and shipped F.O.B. Hampton Florida 32044 |
|
|
63-67 '64 Vette Race
Body Shell
Please Note: We are unable to ship
body shells. They must be picked up in person to avoid freight damage.
When building a race vehicle you
obviously want it as light as possible. So you cut out the floor pan -wheel
wells & inner structure.....As far as the body all you are left with is an
overweight, floppy shell held together with old factory spot welds and body lead. Our bodies are manufactured from extremely complex molds - which produce a rigid
one piece unit. The roof, quarters & firewall are generally stiffened with the
use of internal ribbing. In addition, your all new glass body can be made heavier or
lighter (within reason) depending on your application. Average body weight is
only about 100#'s. |
|
Installed Photos
As far as body
work, you need to scuff off the mold flashing - block sand - prime and paint. The
great part
about owning a rigid glass body - is that you'll never have to worry about
rust. Once you apply your paint scheme that's it - just wash and wax.
Installation
is a snap! Whether you are
installing just the body or an entire package, the bodies attach at the rocker panels,
tail pan, trunk jam, door jam, and front and rear window jams. We also offer
fiberglass wheel tubs, which can be glassed
directly to your new body. (This is done by the installer).
|
 |
 |
63-67 Door -
Pre-assembled
Race Weight Features:
- Smooth interior panel.
- Will accept original handle, hinge & latching
mechanism.
- All holes come closed & must be opened for
installation.
|
- Available in Light
Weight design only.
- Strictly intended for Racing application only!
- Fully gellcoated inner & outer surface.
- Plastic windows required
attached to inner door
frame.
- **Unassembled doors recommended for bodies
other than ours. |
|
 |
63-67 427
Hood
Race Weight Features:
- 427 style scoop for ram air flow.
- Full perimeter bracing & rear baffle installed.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Reinforced skin.
- Scoop comes closed.
- Edges require sanding for desired fit.
- One piece construction - Yes, it comes out of
the mold this way!
|
|
 |
63-67
6.5" Torpedo Hood
Race Weight Features:
- Designed w/Pro-Stock style scoop for
maximum ram air flow.
- Full perimeter bracing & rear baffle installed.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Reinforced skin.
- Scoop comes closed. (Size 41"x6.5"x18")
- Edges require sanding for desired fit.
- One piece construction - Yes, it comes out of
the mold this way!
You
can add a ram air isolator plate during check out.
|
|
|
|
63-64 Pro Front End
- Light Weight Version - is intended for racing
applications and does not come with a
hinge kit.
- These unit generally only weigh in at approx 30# +/- .
IMPORTANT - Please specify the type of racing that the unit will be used for, so we
may build and reinforce your unit accordingly. Units manufactured for "Street
Racing" have a heavier roving on all edges to reduce the chance of tearing (under to
stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit. |
|
|
|
|
|
|
