(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names and headin gs is for the sole purpose of identification.
 

This site has moved...    Enter here.

83-92 Ranger Truck Part Pictures
All Items are American Made Fiberglass Components

                                        

(Click for Tilt Installation) Front Ends                                                                                                                      Features:  - Heavy Duty version - comes complete with hinge kit - click above for all the "How To" information  - Grey exterior gellcoat finish can be easily sanded and prepared for finishing  - Smooth 90° roll into wheel well openings, generally extends in a full  ¾".  - Marker blanks require opening to install.   - The units do come with mold flashing - which must be fared in before preparing for paint.   - One Piece Front Ends do need the rear fender panel to be cut in order to utilize the hinge kit    supplied.....They can be made to slide forward than tilt without cutting the fender, however, this    depends on the tire size and will involve detailed planning and fabrication on the installers part.  - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.     Wheel wells cannot be completely attached to the front end as they will interfere with engine &     firewall component, when hinging.  - Light Weight Version - is intended for racing applications and does not come with a hinge kit.      - These unit generally only weigh in at approx 25#  +/- .   NOTE:  When ordering Light Weight version truck racing components are "Special Order" and              Non Returnable.  IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Mud Bog" racing have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact and mud load) and usually weigh  10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Mud Bog units.
83-88 2" Dominator™ Cowl H/D Features:  - Bolts Directly to the OEM hinge & Latch*.  - Hi-Rise design provides and additional    2" clearance - once opened.  - Rear baffle comes closed & may be opened     for increase functional cowl air flow.   Hood Construction                                          Scoop Opening	83-88 2" Dominator™ Cowl Inner H/D Features:  - Smooth Sandable gray Gellcoat Inner      finish with steel anchors for both hinge &     latch.  - Side  90° edges must be left long to provide    maximum strength during shipping and may    need sanded for a correct fit.
89-92  2" Dominator™ Cowl H/D Features:  - Bolts Directly to the OEM hinge & Latch*.  - Hi-Rise design provides and additional    2" clearance - once opened.  - Rear baffle comes closed & may be opened     for increase functional cowl air flow.   Hood Construction                                          Scoop Opening	89-92  2" Dominator™ Cowl Inner H/D Features:  - Smooth Sandable gray Gellcoat Inner      finish with steel anchors for both hinge &     latch.  - Side  90° edges must be left long to provide    maximum strength during shipping and may    need sanded for a correct fit.
89-92 Mach-1 Hood H/D Features:  - Fully Lined TECHHOOD™ design Bolts Directly    to the OEM hinge & Latch*.  - Mach-1 styling provides an additional 2"     clearance.   - Rear Baffle & Front Scoops must be cut open     to be made functional.      Hood Construction                                 Scoop Opening	89-92 Mach-1 Hood Inner H/D Features:  - Smooth Sandable gray Gellcoat Inner      finish with steel anchors for both hinge &     latch.  - Side 90° edges must be left long to provide    maximum strength during shipping and     may need sanded for a correct fit.

© Copyright 1987-date 
® U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc. 9009 South East C.R. 325 Hampton Florida 32044