(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names and headings is for the sole purpose of identification.
 

This site has moved...    Enter here.

75-79 Nova Part Pictures
All Items are American Made Fiberglass Components

                                        

75-79 Stock Hood H/D Features:  - 90 edges on both sides help to maintain fender    contours.  - Full perimeter inner frames - utilizes OEM hinge    & latch.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Coremat® reinforced skin aids in reduction of     print-thru.       H/D Construction      L/W Construction        Link to Scoops      Scoop Installation	75-79 Stock Hood w/cowl panel L/W Features:  - Full perimeter inner bracing.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Reinforced skin aids in reduction of     print-thru.          L/W Construction        Link to Scoops      Scoop Installation
75-79 Cowl Induction 2" Hood H/D Features:  - Styled after the original Z-28 design.  - 90 edges on both sides help to maintain fender    contours.  - Full perimeter inner frames - utilizes OEM hinge    & latch.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Coremat® reinforced skin.       H/D Construction         L/W Construction	75-79 Cowl Induction 4" Hood H/D Features:  - Styled after the original Z-28 design.  - 90 edges on both sides help to maintain fender    contours.  - Full perimeter inner frames - utilizes OEM hinge    & latch.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Coremat® reinforced skin.       H/D Construction         L/W Construction
75-79 6.5" Aero Hood L/W Features:  - Designed w/Pro-Stock style scoop for    maximum ram air flow.  - Full perimeter bracing & rear baffle installed.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Reinforced skin.  - Scoop comes closed. (Size 33"x6.5"x18")  - Edges require sanding for desired fit.  - One piece construction - Yes, it comes out of     the mold this way!
75-79 Front End                           (Click for Tilt Installation)                                  Features:  - Heavy Duty version - comes complete with hinge kit - click above for all the "How To" information.  - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.  - Smooth 90° roll into wheel well openings, generally extends in a full  ¾".  - Headlight blanks require opening to install light bowl and trim.  - The units do come with mold flashing - which must be fared in before preparing for paint.   - Tilt Front Ends do need the rear fender panel to be cut in order to utilize the hinge kit    supplied.....They can be made to slide forward than tilt without cutting the fender, however, this    depends on the tire size and will involve detailed planning and fabrication on the installers part.  - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.     Wheel wells cannot be completely attached to the front end as they will interfere with engine &     firewall component, when hinging.  - Light Weight Version - is intended for racing applications and does not come with a hinge kit.      - These unit generally only weigh in at approx 30#  +/- .   IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.
75-79 Front Fender  Features:  - Smooth grey gellcoat exterior finish..  - Fiberglass texture, Black lacquer inner finish.  - Hood Jam holes, hinging and attaching     points must be opened for installation.  - Mold flashing must be removed for finishing.  - No other reproduction fiberglass fenders     come  so complete.  - Fiberglass hood required for use with     fiberglass fenders.
75-79 Trunk Lid L/W Features:  - Full perimeter bracing.  - 90 edges on both sides help to maintain body    contours.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Reinforced skin aids in reduction of print-thru.
75-79 Bumpers L/W Features:  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Reinforced skin aids in reduction of print-thru

© Copyright 1987-date 
® U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc. 9009 South East C.R. 325 Hampton Florida 32044