(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names an d headings is for the sole purpose of identification.
 

 

 

 

 

 

               

This site has moved...    Enter here.

 

 

 

 

 

 


Click Here to Bookmark this Site !

72-93 Dodge Truck  Part Pictures
All Items are American Made Fiberglass Components

                                    
72-78 Front End 79-80 Front End

72-78 Front End 

79-80 Front End 

Smooth gelcoat finish ! R/T
72-80 Front End 3.5" Cowl Induction  
Note: The Heavy Duty version of this front end utilizes the same inner liner as our TECHHOOD® shown below.
Requires the use of '79 and newer cowl panel.
72-80 Front End R/T Style
Note: The Heavy Duty version of this front end utilizes the same inner liner as our TECHHOOD® shown below.
Requires the use of '79 and newer cowl panel.

                                                              (Click for Tilt Installation)
 
Front Ends  
        
                                                                                                                
  Features:
 -
Heavy Duty version - comes complete with hinge kit - click above for all the "How To" information
 - Grey exterior gellcoat finish can be easily sanded and prepared for finishing
 - Smooth 90° roll into wheel well openings, generally extends in a full  ¾".
 - Marker blanks require opening to install. 
 - The units do come with mold flashing - which must be fared in before preparing for paint. 
 -
One Piece Front Ends do need the rear fender panel to be cut in order to utilize the hinge kit
   supplied.....They can be made to slide forward than tilt without cutting the fender, however, this
   depends on the tire size and will involve detailed planning and fabrication on the installers part.
 - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.
    Wheel wells cannot be completely attached to the front end as they will interfere with engine &
    firewall component, when hinging.

                                    
81-93 Front End

 81-93 Front End   

  (Click for Tilt Installation)

Heavy Duty version - comes complete with hinge kit.

Photo Coming Soon

81-93 Front End 3.5" Cowl Induction  
Note: The Heavy Duty version of this front end utilizes the same inner liner as our TECHHOOD® shown above.
81-93 Front End R/T Style
Note: The Heavy Duty version of this front end utilizes the same inner liner as our TECHHOOD® shown above.

                                                           (Click for Tilt Installation)
 - Light Weight Version - is intended for racing applications and does not come with a hinge kit.    
 - These unit generally only weigh in at approx 25#  +/- .  

NOTE:  When ordering Light Weight version truck racing components are "Special Order" and 
            Non Returnable. 

IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Mud Bog" racing have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact and mud load) and usually weigh 
10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Mud Bog units.
        

Smooth Gellcoat Finish Non - Tech Hood inner Smooth Gellcoat Finish
72-78  Stock Hood 
H/D Features:
 - Smooth
gray gellcoat finish.
 - Frames use existing Hinge &
   Latch.
 - Fiberglass texture inner coated
   with Black Lacquer.

  ( Link to H / D Hood Construction)
72-93  Inner View 
 - 90° edges come long - may
   need sanded  for a correct fit.
79-93 Stock Hood 
H/D Features:
 - Smooth
gray gellcoat finish.
 - Frames use existing Hinge &
   Latch.
 - Fiberglass texture inner coated
   with Black Lacquer.

  ( Link to H / D Hood Construction)
fdt-31.gif (13429 bytes)




72-93  3"  Cowl Induction

H/D Features:
 - Bolts Directly to the OEM hinge & Latch*.
 - Hi-Rise design provides and additional
   3" clearance.
 - Rear baffle comes closed & may be opened 
   for increase functional cowl air flow.
 
Hood Construction                                 Scoop Opening
   
Smooth Inner

 72-93 3" Cowl Induction Inner 
H/D Features:
 - Smooth Sandable gray Gellcoat Inner 
    finish with steel anchors for both hinge & latch.
 - Side  90° edges must be left long to provide
   maximum strength during shipping and may
   need sanded for a correct fit.
 - 79-93 Cowl Panel Required for use on 72-78 
   models.

R/T
          

72-93 R/T Hood
H/D Features:
 - Fully Lined TECHHOOD™ design Bolts Directly
   to the OEM hinge & Latch*.
 - R/T styling provides an additional 2" 
   clearance.
  - Rear Baffle & Front Scoop must be cut  open

     to be made functional.
 
  

 
   Hood Construction                                 Scoop Opening
Smooth gelcoat finish !

72-93 R/T Inner 
H/D Features:
 - Smooth Sandable gray Gellcoat Inner 
    finish with steel anchors for both hinge & latch.
 - Side  90° edges must be left long to provide
   maximum strength during shipping and may
   need sanded for a correct fit.
 - 79-93 Cowl Panel Required for use on 72-78 
   models.



Push to Reveal Order Form

Home | Order Now | E-Mail
 Rebate | About us | Catalog | Games
 Part Construction | Installation | T-Shirts | Photos


usbody.com 
Quality Automotive Body Panels Since 1987
8823 Van Fleet Road Riverview Florida 33578
Secure on-line ordering available 24/7 
FAX Orders can be placed anytime at (352) 468-2164 
For more information or to check on an existing order e-mail us at customerservice
@usbody.com  
This site is updated daily. All components manufactured are listed 
on this site. (If you don't see your parts listed, they are not available.) 

© Copyright 1987-date 
® U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc.
8823 Van Fleet Road Riverview Florida 33578