(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names and headings is for the sole purpose of identification.
 

 

 

 

 

 

               

This site has moved...    Enter here.

 

 

 

 

 

 

Click Here to Bookmark this Site !

70-81 Firebird Part Pictures
All Items are American Made Fiberglass Components

                                        
70-76 Stock Hood

70-76 Stock Hood

H/D Features:
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   (Original striker plate must be installed from the
   metal hood for use with latch.)
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin aids in reduction of
    print-thru.

      H/D Construction

     L/W Construction

       Link to Scoops      Scoop Installation
70-76 L-88 Hood

70-76 L-88 3" Hood

H/D Features:
 - Styled after the original L-88 design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   (Original striker plate must be installed from the
   metal hood for use with latch.)

 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin.
      H/D Construction         L/W Construction
70-76 400 Hood
70-76 400 Hood
H/D Features:
 - Styled after the original 400 design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   (Original striker plate must be installed from the
   metal hood for use with latch.)

 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin.
      H/D Construction         L/W Construction
 
70-73 Bumper



70-73 Bumper

L/W Features:
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Reinforced skin aids in reduction of print-thru.

H/D Features:
- Comes with Back flange for easier installation.
70-73 One Piece Front End
70-73 Front End                                                        (Click for Front End Installation Tips)
 
Features:
 -
Heavy Duty version
- does not come with a hinge kit 
 - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.
 - Smooth 90 roll into wheel well openings, generally extends in a full  ".
 - The units do come with mold flashing - which must be fared in before preparing for paint. 
 - They can be made to slide forward than tilt without cutting the fender, however, this
   depends on the tire size and will involve detailed planning and fabrication on the installers part.
 - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.
    Wheel wells cannot be completely attached to the front end as they will interfere with engine &
    firewall component, when hinging.

 - Light Weight Version - is intended for racing applications and does not come with a hinge kit    
 - These unit generally only weigh in at approx 30#  +/- .  

IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.

77-81 Firebird Part Pictures
All Items are American Made Fiberglass Components

                                        

77-81 Stock Hood
77-81 Stock Hood
H/D Features:
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   (Original striker plate must be installed from the
   metal hood for use with latch.)
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin aids in reduction of
    print-thru.

      H/D Construction

     L/W Construction

       Link to Scoops      Scoop Installation
77-81 400 Hood

77-81 400 Hood

H/D Features:
 - Styled after the original 400 design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   (Original striker plate must be installed from the
   metal hood for use with latch.)

 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin.
      H/D Construction         L/W Construction
77-81 L-88 Hood

77-81 L-88 3" Hood

H/D Features:
 - Styled after the original L-88 design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   (Original striker plate must be installed from the
   metal hood for use with latch.)

 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin.
      H/D Construction         L/W Construction
77-81 Twin Turbo Hood

77-81 Twin Turbo Hood

H/D Features:
 - Styled after the original 70's Turbo design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   (Original striker plate must be installed from the
   metal hood for use with latch.)

 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin.
      H/D Construction         L/W Construction
77-81 Daytona Hood
H/D Features:
 - Styled after the original 70's Daytona design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   (Original striker plate must be installed from the
   metal hood for use with latch.)

 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin.
77-81 Daytona Hood
      H/D Construction        L/W Construction
Fully lined - smooth gellcoated inner.
77-81 4" Cowl Induction Hood
H/D Features:
 - Cowl Induction style design. (3.5" Clearance)
   TECHHOOD™ design.
 - 90 edges on both sides help to maintain fender
   contours.
 
- Full inner frames - utilizes OEM hinge.
  (Original striker plate must be installed from the
   metal hood for use with latch.)
 - Fully lined - smooth gellcoated inner.

 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin reduces "print thru".
 - Scoop and Inner liner come closed.
77-81 Cowl Induction Hood
      H/D Construction         L/W Construction
                   Link to Scoop Opening
70-81 Door
L/W Features:
 - Smooth interior panel.
 - Will accept original handle, hinge & latching
   mechanism.
 - All holes come closed & must be opened for
   installation. 
 - Available in Light Weight design only.
 - Strictly intended for Racing application only!
 
 - Fully gellcoated inner & outer surface.
 - Plastic windows required  attached to inner
   door frame.
81 Pro Front End

           81 Pro Front End - No Hood                          
(Click for Front End Installation Tips)   

                                                      
 - Light Weight Version - is intended for racing applications and does not come with a hinge kit.    
 - These unit generally only weigh in at approx 30#  +/- .  

IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.


Push to Reveal Order Form

Home | Order Now | E-Mail
 Rebate | About us | Catalog | Games
 Part Construction | Installation | T-Shirts | Photos


usbody.com 
Quality Automotive Body Panels Since 1987
8823 Van Fleet Road Riverview Florida 33578
Secure on-line ordering available 24/7 
FAX Orders can be placed anytime at (352) 468-2164 
For more information or to check on an existing order e-mail us at customerservice
@usbody.com  
This site is updated daily. All components manufactured are listed 
on this site. (If you don't see your parts listed, they are not available.) 

Copyright 1987-date 
U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc.
8823 Van Fleet Road Riverview Florida 33578