(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names and headings is for the sole purpose of identification.
 

 

 

 

 

 

               

This site has moved...    Enter here.

 

 

 

 

 

 

Click Here to Bookmark this Site !

70-72 Monte Carlo Part Pictures
All Items are American Made Fiberglass Components

                                        
70-72 Stock hood

70-72 Stock Hood

H/D Features:
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin aids in reduction of
    print-thru.

      H/D Construction

     L/W Construction

       Link to Scoops      Scoop Installation
70-72 Cowl Induction Hood


70-72 Cowl Induction 2" Hood

H/D Features:
 - Styled after the original Z-28 design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin.
      H/D Construction         L/W Construction
 
70-72 4" Cowl Induction Hood
H/D Features:
 - Cowl Induction style design. (3.5" Clearance)
   TECHHOOD™ design.
 - 90 edges on both sides help to maintain fender
   contours.
 
- Full inner frames - utilizes OEM hinge & latch.
 - Fully lined - smooth gellcoated inner.

 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin reduces "print thru".
 - Rear Baffle comes closed.
      H/D Construction         L/W Construction
                   Link to Scoop Opening
70-72 Trunk Lid
H/D Features:
 - 90 edges on both sides help to maintain 
   contours.
 - Full perimeter inner frames utilizes OEM hinge 
   & latch.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin aids in reduction of  
   print-thru.

70-72 Trunk Lid

70-72 Front End
70-72 Front End                                                           (Click for Front End Installation Tips)
 
Features:
 -
Heavy Duty version - comes with
out a hinge kit - click above for all the "How To"
   information.
 - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.
 - Smooth 90 roll into wheel well openings, generally extends in a full  ".
 - Headlight blanks require opening to install light bowl and trim.
 - The units do come with mold flashing - which must be fared in before preparing for paint. 
 - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.
    Wheel wells cannot be completely attached to the front end as they will interfere with engine &
    firewall component, when hinging.

 - Light Weight Version - is intended for racing applications and does not come with a hinge kit.    
 - These unit generally only weigh in at approx 30#  +/- .  

IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.

 

70-72 Front Fender
 Features:
 - Smooth grey gellcoat exterior finish..
 - Fiberglass texture, Black lacquer inner finish.
 - Hood Jam holes,
hinging and attaching
   points must be opened for installation.
 - Mold flashing must be removed for finishing.
 - No other reproduction fiberglass fenders
   come so complete.
 - Fiberglass hood required for use with
   fiberglass fenders.
70-72 Front Fender
71 Front & 70-72 Rear Bumpers
L/W Features:
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Reinforced skin aids in reduction of print-thru.

73-77 Monte Carlo Part Pictures
All Items are American Made Fiberglass Components

                                        
73-77 Stock Hood

73-77 Stock Hood

H/D Features:
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin aids in reduction of
    print-thru.

      H/D Construction

     L/W Construction

       Link to Scoops      Scoop Installation
73-77 Cowl Induction Hood

73-77 Cowl Induction 2" Hood

H/D Features:
 - Styled after the original Z-28 design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin.
      H/D Construction         L/W Construction


Push to Reveal Order Form

Home | Order Now | E-Mail
 Rebate | About us | Catalog | Games
 Part Construction | Installation | T-Shirts | Photos


usbody.com 
Quality Automotive Body Panels Since 1987
8823 Van Fleet Road Riverview Florida 33578
Secure on-line ordering available 24/7 
FAX Orders can be placed anytime at (352) 468-2164 
For more information or to check on an existing order e-mail us at customerservice
@usbody.com  
This site is updated daily. All components manufactured are listed 
on this site. (If you don't see your parts listed, they are not available.) 

Copyright 1987-date 
U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc.
8823 Van Fleet Road Riverview Florida 33578