(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names and headings is for the sole purpose of identification.
 

 

 

 

 

               

This site has moved...    Enter here.

 

 

 

 

 

 

Click Here to Bookmark this Site !

68-72 Chevelle/Malibu Part Pictures
All Items are American Made Fiberglass Components

                                        
68-69 Stock Hood
68-69 Stock Hood
H/D Features:
 - 90 edges on both sides help to
    maintain fender contours.
 - Full perimeter inner frames - utilizes
    OEM hinge & latch.
 - Black lacquered fiberglass textured
    inner finish.
 - Sandable gray gellcoated exterior
    finish.
 - Coremat® reinforced skin aids in
     reduction of print-thru.

     H/D Const.

      L/W Const.

 Scoops

  Scoop Install

68-69 SS hood
68-69 Super Sport Hood
H/D Features:
 - Styled after the original SS design.
 - 90 edges on both sides help to
    maintain fender contours.
 - Full perimeter inner frames - utilizes
    OEM hinge & latch.
 - Black lacquered fiberglass textured
    inner finish.
 - Full Open inner chamber provides no
   additional clearance. Original Chrome
   trim required.
         H/D Const.       L/W Const.
68-69 2" Cowl Induction Hood
68-69 Cowl Induction 2" Hood
H/D Features:
 - Styled after the original Z-28 design.
 - 90 edges on both sides help to
    maintain fender contours.
 - Full perimeter inner frames - utilizes
    OEM hinge & latch.
 - Black lacquered fiberglass textured
    inner finish.
 - Full Open inner chamber provides 2"
   of additional clearance.
 - Coremat® reinforced skin.
         H/D Const.       L/W Const.
68-69 6" Dominator Hood


68-69 6" Dominator Cowl Hood

L/W Features:
 - Designed w/Dominator style scoop.
 - Installed perimeter bracing baffle.    
 - Black fiberglass textured inner.
 - Sandable gray gellcoated exterior.
 - Reinforced skin.
 - Dominator scoop provides +/- 6"
   clearance at rear & +/- 5" clearance
   at stock carb location.
 - Edges require sanding for desired fit.
 - One piece construction
            L/W Construction
68-69 Aero Hood
68-69 6.5" Aero Hood
L/W Features:
 - Designed w/Pro-Stock style scoop
   for maximum ram air flow.
 - Installed perimeter bracing baffle.   
 - Black fiberglass textured inner.
 - Sandable gray gellcoated exterior.
 - Reinforced skin.
 - Scoop comes closed. (33"x6.5"x18")
 - Edges require sanding for desired fit.
 - One piece construction - Yes, it
   comes out of the mold this way!
            L/W Const.
           Link to Scoop Opening
68-69 4" Cowl Induction Hood


68-69 Cowl Induction 4" Hood

H/D Features:
 - Styled after the original Z-28 design.
 - 90 edges on both sides help to
    maintain fender contours.
 - Full perimeter inner frames - utilizes
    OEM hinge & latch.
 - Black lacquered fiberglass textured
    inner finish.
 - Full Open inner chamber provides 4"
   of additional clearance.
 - Coremat® reinforced skin.
         H/D Const.       L/W Const.
70-72 Stock Hood
70-72 Stock Hood
H/D Features:
 - 90 edges on both sides help to
    maintain fender contours.
 - Full perimeter inner frames - utilizes
    OEM hinge & latch.
 - Black lacquered fiberglass textured
    inner finish.
 - Sandable gray gellcoated exterior
    finish.
 - Coremat® reinforced skin aids in
     reduction of print-thru.

     H/D Const.

      L/W Const.

 Scoops

  Scoop Install

70-72 SS Hood


70-72 Super Sport Hood

H/D Features:
 - Styled after the original SS design.
 - 90 edges on both sides help to
    maintain fender contours.
 - Full perimeter inner frames - utilizes
    OEM hinge & latch.
 - Black lacquered fiberglass textured
    inner finish.
 - Full Open inner chamber provides 1"
   of additional clearance.
 - Coremat® reinforced skin.
         H/D Const.       L/W Const.
70-72 Cowl Induction Hood


70-72 Cowl Induction 2" Hood

H/D Features:
 - Styled after the original Z-28 design.
 - 90 edges on both sides help to
    maintain fender contours.
 - Full perimeter inner frames - utilizes
    OEM hinge & latch.
 - Black lacquered fiberglass textured
    inner finish.
 - Full Open inner chamber provides 2"
   of additional clearance.
 - Coremat® reinforced skin.
         H/D Const.       L/W Const.


 

70-72 6" Dominator Cowl Hood
L/W Features:
 - Designed w/Dominator style scoop.
 - Installed perimeter bracing baffle.    
 - Black fiberglass textured inner.
 - Sandable gray gellcoated exterior.
 - Reinforced skin.
 - Dominator scoop provides +/- 6"
   clearance at rear & +/- 5" clearance
   at stock carb location.
 - Edges require sanding for desired fit.
 - One piece construction

            L/W Construction
70-72 Aero Hood
70-72 6.5" Aero Hood
L/W Features:
 - Designed w/Pro-Stock style scoop
   for maximum ram air flow.
 - Installed perimeter bracing baffle.   
 - Black fiberglass textured inner.
 - Sandable gray gellcoated exterior.
 - Reinforced skin.
 - Scoop comes closed. (33"x6.5"x18")
 - Edges require sanding for desired fit.
 - One piece construction - Yes, it
   comes out of the mold this way!
            L/W Const.
           Link to Scoop Opening
 



70-72 4" Techhood

70-72 4" Cowl Induction Hood
H/D Features:
 - Cowl Induction style design. (3.5"
    Clearance) TECHHOOD™ design.
 

 - 90° edges on both sides help to
    maintain fender contours.
 - Full inner frames - utilizes OEM hinge
   & latch.
 - Fully lined - smooth gellcoated inner.
 - Sandable gray gellcoated exterior
    finish.
 - Coremat® reinforced skin reduces
    "print thru".
 - Scoop and Inner liner come closed.
             H/D Construction                      L/W Construction
                                                Link to Scoop Opening
Full inner frame!!
68-69 Front Fender 70-72 '70 Style Front Fender 70-72  '71-'72 Style El Camino Front Fender

68-69
Front Fender
                        70-72 Front Fender                        70-72 E.C. Front Fender
 Features:
 - Smooth gray gellcoat exterior finish..
 - Fiberglass texture, Black lacquer inner finish.
 - Hood Jam holes, hinging and attaching points must be opened for installation.
 - Mold flashing must be removed for finishing.
 - No other reproduction fiberglass fenders come so complete.
 - Fiberglass hood required for use with fiberglass fenders.
68-69 S.S. One Piece Front End 68-69 Front Surrond 70-72 SS One Piece Front End

           68-69 Front End                   68-69 Pro Front End                70-72 S.S. Front End             

68-72 Front End
                                                                              

 
Features:
 -
Heavy Duty version - Click above for all the "How To" information.
 - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.
 - Smooth 90° roll into wheel well openings, generally extends in a full  ¾".
 - Headlight blanks require opening to install light bowl and trim.
 - The units do come with mold flashing - which must be fared in before preparing for paint. 
 -
Tilt Front Ends do need the rear fender panel to be cut in order to hinge
   They can be made to slide forward than tilt without cutting the fender, however, this
   depends on the tire size and will involve detailed planning and fabrication on the installers part.
 - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.
    Wheel wells cannot be completely attached to the front end as they will interfere with engine &
    firewall component, when hinging.


 - Light Weight Version - is intended for racing applications and does not come with a hinge kit.    
 - These unit generally only weigh in at approx 30#  +/- .  

IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.

                                        

Hinge Kit Supplied with HEAVY DUTY one piece front ends. For more information - click the Tilt Installation link above.
68-72 Trunk Lid


69-72 Trunk Lid
H/D Features:
 - 90 edges on both sides help to
    maintain fender contours.
 - Full perimeter inner frames - utilizes
    OEM hinge & latch.
 - Black lacquered fiberglass textured
    inner finish.
 - Sandable gray gellcoated exterior
    finish.
 - Coremat® reinforced skin aids in
     reduction of print-thru.
                 H/D Construction               L/W Construction
70-72 Body Shell
                                             (Click for Race Body Installation Tips)
70-72 Race Body Shell

  When building a race vehicle you obviously want it as light as possible.  So you cut out the floor pan - wheel wells & inner structure.....So as far as the body all you are left with is an overweight, floppy shell held together with old factory spot welds and body lead.  Our bodies are manufactured from extremely complex molds - which produce a rigid one piece unit.  The roof, quarters & firewall are generally stiffened with the use of internal ribbing.  In addition, your all new glass body can be made heavier or lighter (within reason) depending on your application.   Average body weight is only about 100#'s

 

Detailed Firewall Blanked in windows & detailed jams.
As far as body work, you need to scuff off the mold flashing - block sand - prime and paint.  The great part about owning a rigid glass body - is that you'll never have to worry about rust .  Once you apply your paint scheme that's it - just wash and wax.

  Installation is a snap!  Whether you are installing just the body or an entire package, the bodies attach at the rocker panels, tail pan, trunk jam, door jam, and front and rear window jams.  We also offer fiberglass wheel tubs, which can be glassed directly to your new body. (This is done by the installer).

                                        

68-69 Door
70-72 Door
68-72 Door       (68-69 left - 70-72 right)
L/W Features:
 - Smooth interior panel. (As Shown Above)
 - Will accept original handle, hinge & latching
   mechanism.
 - All holes come closed & must be opened for
   installation. 
 - Available in Light Weight design only.
 - Strictly intended for Racing application only!
 - Fully gellcoated inner & outer surface.
 - Plastic windows required  attached to inner
   door frame.
71-72 Bumpers
L/W Features:
 - Black lacquered fiberglass
   textured inner.
 - Sandable gray gellcoated
   exterior finish.
 - Reinforced skin aids in
   reduction of print-thru.
71-72 rear Bumper


Push to Reveal Order Form

Home | Order Now | E-Mail
 Rebate | About us | Catalog | Games
 Part Construction | Installation | T-Shirts | Photos


usbody.com 
Quality Automotive Body Panels Since 1987
8823 Van Fleet Road Riverview Florida 33578
Secure on-line ordering available 24/7 
FAX Orders can be placed anytime at (352) 468-2164 
For more information or to check on an existing order e-mail us at customerservice
@usbody.com  
This site is updated daily. All components manufactured are listed 
on this site. (If you don't see your parts listed, they are not available.) 

© Copyright 1987-date 
® U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc.
8823 Van Fleet Road Riverview Florida 33578