(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names and headings is for the sole purpose of identification.
 

 

 

 

 

               

This site has moved...    Enter here.

 

 

 

 

 

 


Click Here to Bookmark this Site !

67-76 Valiant Part Pictures
All Items are American Made Fiberglass Components

                                        
67-68 Stock Hood

67-68 Stock Hood
H/D Features:
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin aids in reduction of
    print-thru.

      H/D Construction

     L/W Construction

       Link to Scoops      Scoop Installation
67-72 Trunk Lid

67-72 Trunk Lid
L/W Features:
 - 90 edges on both sides help to maintain body
   contours.
 - Full perimeter bracing supports the entire outer
   surface.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.

L/W Construction

69-72 Stock Hood

69-72 Stock Hood

H/D Features:
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin aids in reduction of
    print-thru.

      H/D Construction

     L/W Construction

       Link to Scoops      Scoop Installation
6-Pack

69-72 6-Pack Hood

H/D Features:
 - Styled after the original 6-Pack 3" design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin.
      H/D Construction         L/W Construction
                   Link to Scoop Opening
69-72 6.5" Aero Hood
L/W Features:
 - Designed w/Pro-Stock style scoop.
 - Full perimeter bracing & rear baffle installed.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin.
 - Scoop comes closed. (Size 33"x6.5"x18")
 - Edges require sanding for desired fit.
 - One piece construction - Yes, it comes out of
    the mold this way!
            L/W Construction
                   Link to Scoop Opening

 
Stock Hood

73-76 Stock Hood
H/D Features:
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin aids in reduction of
    print-thru.

      H/D Construction

     L/W Construction

       Link to Scoops      Scoop Installation

73-76 6pk Hood

73-76
6-Pack Hood

H/D Features:
 - Styled after the original 6-Pack 3 3/4" design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin.
      H/D Construction         L/W Construction
                   Link to Scoop Opening
73-76 Aero Hood - (Lift off ONLY)

73-76 6.5" Aero Hood
L/W Features:
 - Designed w/Pro-Stock style scoop.
 - Full perimeter bracing & rear baffle installed.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat
reinforced skin.
 - Scoop comes closed. (Size 33"x6.5"x18")
 - Edges require sanding for desired fit.
 - One piece construction - Yes, it comes out of
    the mold this way!
            L/W Construction
                   Link to Scoop Opening

70-76 Front Fender Detailed front view

70-76
Front Fender
 Features:
 - Smooth grey gellcoat exterior finish..
 - Fiberglass texture, Black lacquer inner finish.
 - Hood Jam holes, Light plug and attaching points must be opened for installation.
 - Mold flashing must be removed for finishing.
 - No other reproduction fiberglass fenders come so complete.
67-76 Door
L/W Features:
 - Detailed interior panel.
 - Will accept original handle, hinge & latching
   mechanism.
 - All holes come closed & must be opened for
   installation. 
 - Available in Light Weight design only.
 - Strictly intended for Racing application only!
 - Fully gellcoated inner & outer surface.
 - Plastic windows & aluminum top post required
   attached to inner door frame.
Detailed Inner
70-72 Pro Front End

70-72 Pro Front End
                                                (Click for Front End Installation Tips)


 - Light Weight Version - is intended for racing applications and
does not come with a hinge
   kit.    
 - These unit generally only weigh in at approx 30#  +/- .  
 - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.
 - Smooth 90 roll into wheel well openings, generally extends in a full  ".
 - Headlight blanks require opening to install light bowl and trim.
 - The units do come with mold flashing - which must be fared in before preparing for paint. 

IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.


Push to Reveal Order Form

Home | Order Now | E-Mail
 Rebate | About us | Catalog | Games
 Part Construction | Installation | T-Shirts | Photos


usbody.com 
Quality Automotive Body Panels Since 1987
8823 Van Fleet Road Riverview Florida 33578
Secure on-line ordering available 24/7 
FAX Orders can be placed anytime at (352) 468-2164 
For more information or to check on an existing order e-mail us at customerservice
@usbody.com  
This site is updated daily. All components manufactured are listed 
on this site. (If you don't see your parts listed, they are not available.) 

Copyright 1987-date 
U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc.
8823 Van Fleet Road Riverview Florida 33578