(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names and headings is for the sole purpose of identification.
 

This site has moved...    Enter here.

65-67 Lemans Part Pictures
All Items are American Made Fiberglass Components

                                        

65 Stock Hood L/W Features:  - 90 edges on both sides help to maintain fender    contours.  - Full perimeter bracing.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Reinforced skin aids in reduction of print-thru.            L/W Construction        Link to Scoops      Scoop Installation	65 Trunk Lid L/W Features:  - 90 edges on both sides help to maintain body    contours.  - Full perimeter bracing.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Reinforced skin aids in reduction of print-thru.            L/W Construction
64-65 Door L/W Features:  - Smooth interior panel.  - Will accept original handle, hinge & latching    mechanism.  - All holes come closed & must be opened for    installation.   - Available in Light Weight design only.  - Strictly intended for Racing application only!  - Fully gellcoated inner & outer surface.  - Plastic windows & aluminum top post required    attached to inner door frame.
65 Front Bumper L/W Features:  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Reinforced skin aids in reduction of print-thru.  - Outer Shell only - NOT intended for collision    purposes.	65 Rear Bumper L/W Features:  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Reinforced skin aids in reduction of print-thru.  - Outer Shell only - NOT intended for collision    purposes.
65 Pro Front End                                                  (Click for Front End Installation Tips)  - Light Weight Version - is intended for racing applications and does not come with a hinge kit.      - These unit generally only weigh in at approx 30#  +/- .    - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.  - Smooth 90° roll into wheel well openings, generally extends in a full  ¾".  - Headlight blanks require opening to install light bowl and trim.  - The units do come with mold flashing - which must be fared in before preparing for paint.  IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.

© Copyright 1987-date 
® U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc. 9009 South East C.R. 325 Hampton Florida 32044