(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names and headings is for the sole purpose of identification.
 

This site has moved...    Enter here.

*Body Package includes: Body, Doors, Rear Bumpers and choice of hood.

63-67 Corvette Part Pictures
All Items are American Made Fiberglass Components

                                        

(Click for Race Body Installation Tips) 63-67 '64 Vette Race Body Shell   When building a race vehicle you obviously want it as light as possible.  So you cut out the floor pan - wheel wells & inner structure.....So as far as the body all you are left with is an overweight, floppy shell held together with old factory spot welds and body lead.  Our bodies are manufactured from extremely complex molds - which produce a rigid one piece unit.  The roof, quarters & firewall are generally stiffened with the use of internal ribbing.  In addition, your all new glass body can be made heavier or lighter (within reason) depending on your application.   Average body weight is only about 100#'s
As far as body work, you need to scuff off the mold flashing - block sand - prime and paint.  The great part about owning a rigid glass body - is that you'll never have to worry about rust .  Once you apply your paint scheme that's it - just wash and wax.   Installation is a snap!  Whether you are installing just the body or an entire package, the bodies attach at the rocker panels, tail pan, trunk jam, door jam, and front and rear window jams.  We also offer fiberglass wheel tubs, which can be glassed directly to your new body. (This is done by the installer).                             (Click for Race Body Installation Tips)
63-67 Door - Pre-assembled L/W Features:  - Smooth interior panel.  - Will accept original handle, hinge & latching    mechanism.  - All holes come closed & must be opened for    installation.   - Available in Light Weight design only.  - Strictly intended for Racing application only!  - Fully gellcoated inner & outer surface.  - Plastic windows required  attached to inner door    frame.  - **Unassembled doors reccomended for bodies    other than ours.
63-67 427 Hood L/W Features:  - 427 style scoop for ram air flow.  - Full perimeter bracing & rear baffle installed.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Reinforced skin.  - Scoop comes closed.  - Edges require sanding for desired fit.  - One piece construction - Yes, it comes out of     the mold this way!             L/W Construction                    Link to Scoop Opening	63-67 6.5" Torpedo Hood L/W Features:  - Designed w/Pro-Stock style scoop for    maximum ram air flow.  - Full perimeter bracing & rear baffle installed.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Reinforced skin.  - Scoop comes closed. (Size 41"x6.5"x18")  - Edges require sanding for desired fit.  - One piece construction - Yes, it comes out of     the mold this way!             L/W Construction                    Link to Scoop Opening
63-64 Pro Front End - Light Weight Version - is intended for racing applications and does not come with a hinge kit.      - These unit generally only weigh in at approx 30#  +/- .   IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.

© Copyright 1987-date 
® U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc. 9009 South East C.R. 325 Hampton Florida 32044