(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names and headings is for the sole purpose of identification.

This site has moved...    Enter here.

61-6 Ford Truck Part Pictures
All Items are American Made Fiberglass Components

                                        

61-66 1 Ton Front End      (Click for Tilt Installation)     61-66 ½ Ton Front End   61-66 Front Ends  Features:  - Heavy Duty version - comes complete with hinge kit - click above for all the "How To"     information.  - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.  - Smooth 90° roll into wheel well openings, generally extends in a full  ¾".  - The units do come with mold flashing - which must be fared in before preparing for paint.   - One Piece Front Ends do need the rear fender panel to be cut in order to utilize the hinge kit    supplied.....They can be made to slide forward than tilt without cutting the fender, however, this    depends on the tire size and will involve detailed planning and fabrication on the installers part.  - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.     Wheel wells cannot be completely attached to the front end as they will interfere with engine &     firewall component, when hinging.  - Light Weight Version - is intended for racing applications and does not come with a hinge kit.      - These unit generally only weigh in at approx 30#  +/- .   NOTE:  When ordering Light Weight version truck racing components are "Special Order" and              Non Returnable.  IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Mud Bog" racing have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact and mud load) and usually weigh  10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Mud Bog units.
61-66 Front Fender  Features:  - Smooth gray gellcoat exterior finish   - Fiberglass texture, Black lacquer inner finish.  - Hood Jam holes and attaching points must be    opened for installation.  - Mold flashing must be removed for finishing.	53-79 Stepside Fender  Features:  - Smooth gray gellcoat exterior    finish - Fiberglass textured    Black Lacquer inner.  - Smooth 90° roll into wheel well  - Rear flange holes come closed    and require back drilling for    correct alignment.
61-66 Bedside - Fleetside  lwb Features:  - Smooth gray gellcoat finish.  - Full Front and rear roll around with       taillight area.  - Intended for Race or Modified Show     application.     Will NOT bolt to Stock location.  - Unit is sold as a skin only with     stiffeners added - for bracing only,  not     for attachment.
61-66 Door Skin Features:  - Smooth gray gellcoat finish  - One Piece fiberglass    construction.   - Recommended for Race Application.
61-66 Hood H/D Features:  - Smooth gray gellcoat finish.  - Grey gellcoat outer finish has    small edge mold seam -    Requiring Prep before paint.       ( Link to H / D Hood Construction)

© Copyright 1987-date 
® U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc. 9009 South East C.R. 325 Hampton Florida 32044