(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names and headings is for the sole purpose of identification.

 

 

 

 

               

This site has moved...    Enter here.

 

 

 

 

 

 

.

Click Here to Bookmark this Site !

60-66 Chevy Truck   Part Pictures
All Items are American Made Fiberglass Component


                                                                            (Click for Cab Installation)
64-66 Cabs    Short Wheel Base 115"  -  Long Wheel Base 127"
Features:
 - One Piece Outer shell construction - with a few well hidden mold seams.
 - Smooth, easy to prep and paint, gray sandable exterior gellcoat finish.
 - Aluminum plate reinforced firewall & door hinge areas provides the necessary strength for 
   proper support of factory doors & hardware.
 - Marine Grade Pressure treated floor support beams are sealed into the fiberglass and covered 
   with black lacquer finish. 
 - The unit arrives bare without dash, doors or any mechanical or electrical devices.
 - Headliner is supplied and comes with a smooth paintable gellcoat interior finish. 
   (Comes  separately  and requires professional installation.) 
 - Light Weight Model comes with out floor and firewall - This unit is solely intended for serious 
   racing applications.  Tube chassis and metal interior work is required. (Approx. weight 50 -
   70#)
   
    ! ! ! WOW ! ! ! Cabs are detailed right down to the roof lip ! ! . . . . . .?? How did they do that ?? . . . . . . . . . . . . . . . . . . .
                                                     (Click for Cab Installation)
Note:

  Cabs - although strong, straight, rust free & reliable - are not the project for the average "Joe".  They are intended for the serious "Ground Up Builder" who has the time, money & experience to do the job correctly.  

All safety concerns must be taken up with the chassis shop involved with the project.  

  Once finished these cabs look exceptional and should just about last forever, however, sit down and Please give some serious thought before ordering........We prefer that our customers be confident & educated in the amount of work required to complete this project and secure in the choice that you make.
Dash 64-66 Dash blank
Features:
 - Smooth gray gellcoat finish.
60-61 Stock Hood 62-66 Stock Hood 62-66 2" Cowl Induction Hood
60-61 Stock Hood
 - Heavy Duty uses Hinges only. 
62-66 Stock Hood
 - Light Weight Only Pin-On
62-66 2" Cowl Hood
 - H/D uses Hinge & Latch.
62-66 4" Cowl Induction Hood 62-66 Inner View
62-66 4" Cowl Hood  
 - H/D uses Hinge & Latch.
62-66 4" Cowl Hood Inner

62-66 Hoods Pictured Above      
                                          ( Link to H / D Hood Construction)   

H/D Features:
 - Smooth grey gellcoat finish.
 - Front marker lights come closed and require opening.
 - Grey gellcoat outer finish has small edge mold seam - Requiring
   Prep before paint.
60-66 Wheel Well

62-66 Wheel Well
Features:
 - Smooth gray gellcoat finish
 - One Piece fiberglass
   construction. 
 - Recommended for Tilt Front
   Ends or Race Application - Not
   fully braced for Hood hinges.
60-61 Front End 62-6 Stock Hood Front End 62-6 Pre-Split 2" Cowl Tilt

60-61 Front End 

62-66 Front End

62-66 2" Pre-split Cowl Tilt


60-66 Front Ends
                                                                                   (Click for Tilt Installation)
 
Features:
 -
Heavy Duty version - comes complete with hinge kit - click above for all the "How To" information.
 - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.
 - Smooth 90° roll into wheel well openings, generally extends in a full  ¾".
 - Marker blanks require opening to install. 
 - The units do come with mold flashing - which must be fared in before preparing for paint. 
 -
Pre-Split Front End models come with the lower fender section (the part between the door and tire)
   separate.
   It is manufactured with a tongue & groove joint on both the panel and the front end, to help in
   closing alignment.
 -
One Piece Front Ends do need the rear fender panel to be cut in order to utilize the hinge kit
   supplied.....They can be made to slide forward than tilt without cutting the fender, however, this
   depends on the tire size and will involve detailed planning and fabrication on the installers part.
 - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.
    Wheel wells cannot be completely attached to the front end as they will interfere with engine &
    firewall component, when hinging.
62-6 4" Cowl Induction Front End

      62-66 4" Cowl Induction                                                                                                                                                             (Click for Tilt Installation)
 - Light Weight Version - is intended for racing applications and does not come with a hinge kit.    
 - These unit generally only weigh in at approx 30#  +/- .  
 - Pre-Split models are not available in Light Weight.

NOTE:  When ordering Light Weight version truck racing components are "Special Order" and 
            Non Returnable. 

IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Mud Bog" racing have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact and mud load) and usually weigh 
10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Mud Bog units.
60-66 Front Fender Full Back Braceing

60-66 Front Fender
Front Fender
 
Features:
 - Smooth grey gellcoat exterior finish 
 - Original style back brace w/lower anchor bolt for simple  
   installation.
 - Fiberglass texture, Black lacquer inner finish.
 - Hood Jam holes and attaching points must be opened for
   installation.
 - Mold flashing must be removed for finishing.
62-6 Front Filler Panel
60-66 Front Filler Panel
Front Filler Panel
 
Features:
 - Smooth grey gellcoat exterior
    finish. 
 - Large Side flanges for easier
    attaching.
60-66 Front Bumper
60-66 Front Bumper
Front Bumper
 
Features:
 - Race Application Only - Not
    intended for collision. 
60-63 Door Detailed Inner View

60-63 Door Ends


60-63 Door - Hinge Type
Door - Hinge Type
 
H/D Features:
 - Smooth grey gellcoat finish both inside and out.
 - Accepts original hinge, latch & regulator hardware.
 - Double wall posts support upper window and track.
 - Windows come blanked in and must be opened during installation.
 - Coremat® reinforced outer skin reduces "print thru".
 - Original felts can be epoxied in the door post and side track.
 - Door is supplied bare with no glass, mechanism, tracks or hardware.
                                                                                                         
(Click for Additional Door Info)
64-66 Door Detailed Inner View

64-6 Door Ends


64-66 Door - Hinge Type
Door - Hinge Type
 
H/D Features:
 - Smooth grey gellcoat finish both inside and out.
 - Accepts original hinge, latch & regulator hardware.
 - Double wall posts support upper window and track.
 - Windows come blanked in and must be opened during installation.
 - Coremat® reinforced outer skin reduces "print thru".
 - Power window kits can be used to install one piece glass.
 - Original felts can be epoxied in the door post and side track.
 - Door is supplied bare with no glass, mechanism, tracks or hardware.
                                                                                                      
(Click for Additional Door Info)



60-66 Bedside - Fleetside  lwb

Features:
 - Smooth grey gellcoat finish.
 - Full Front and rear roll around with taillight area.
 - Intended for Race or Modified Show application.  Will NOT bolt      to Stock location.
 - Unit is sold as a skin only with stiffeners added - for bracing         only, not for attachment.
55-66 Stepside fender

55-66 Stepside Fender
 
Features:
 - Smooth grey gellcoat exterior
   finish - Fiberglass textured
   Black Lacquer inner.
 - Smooth 90° roll into wheel well.
 - Rear flange holes come closed
   and require back drilling for
   correct alignment.

55-66 Stepside Bed Full Tailgate Opening
55-66 Stepside Bed Stepside Bed (Short Wheel Base Box - 115" w.b.)  
H/D Features:
 - Bed Comes complete with fenders & steps attached - as one piece.  Ideal for customized or
   frenched in taillight applications.
 - Double panel side walls, with a smooth grey gellcoat inner and outer finish.
 - Hollow sealed stake pocket - can be opened if desired for original appearance.
 - Design for use and abuse with heavy Marine Grade PT under floor reinforcements - which can
   support the same weight load as the original bed.
 - Gellcoated Fiberglass floors - recessed 3/4" to allow for the installation of "Aftermarket" Bed Wood
   Kits.
 - Black lacquer over fiberglass texture underneath the bed floor and on the forward side of the back
   splash.
Stock Floor Tubbed Floor
 - Tubbed bed allows for 21" clearance from tub to wheel opening flange.  This allows for 21"-21"
    tires. The distance between the tubs is 33".
 - Side flange is angled and does not have the curled design of the original bed (Due to compound
   curve & fiberglass mold limitations.)
 - Installation time (after removal of original box ) 1-2 hours.
 
NOTE: 
  To install - simply drill thru the bed and the under floor reinforcements and thru bolt it in place with O.D washers.  It may be necessary to drill a new mounting hole through the existing frame.  Drilling - sanding and possible notching of under floor braces may be required for correct installation of your NEW and
IMPROVED, RUST FREE, DENT FREE  bed assembly.  (Ground wire required for electrical).
Detailed Taillight area Smooth Gellcoat Finish
60-66 Fleetside Bed Fleetside Bed (Long Wheel Base Box - 127" w.b.)  
Fleetside Bed (Long Wheel Base Box - 127" w.b.)  
H/D Features:
 - Bed Comes complete with bedsides attached - as one piece.  Ideal for customized or
   frenched in taillight applications.
 - Box section side walls, with a smooth grey gellcoat inner and outer finish.
 - Hollow sealed stake pocket - can be opened if desired for original appearance.
 - Design for use and abuse with
heavy Marine Grade PT under floor reinforcements - which can
   support the same weight load as the original bed.
 - Gellcoated Fiberglass floors have a ribbed design , eliminating the need for a Wood kit.
 - Black lacquer over fiberglass texture underneath the bed floor and on the forward side of the back
   splash.
Full Solid Floor Heavily Reinforced
  - Installation time (after removal of original box ) 1-2 hours.
 
NOTE: 
  To install - simply drill thru the bed and the under floor reinforcements and thru bolt it in place with O.D washers.  It may be necessary to drill a new mounting hole through the existing frame.  Drilling - sanding and possible notching of under floor braces may be required for correct installation of your NEW and
IMPROVED, RUST FREE, DENT FREE  bed assembly.  (Ground wire required for electrical).


Push to Reveal Order Form

Home | Order Now | E-Mail
 Rebate | About us | Catalog | Games
 Part Construction | Installation | T-Shirts | Photos


usbody.com 
Quality Automotive Body Panels Since 1987
8823 Van Fleet Road Riverview Florida 33578
Secure on-line ordering available 24/7 
FAX Orders can be placed anytime at (352) 468-2164 
For more information or to check on an existing order e-mail us at customerservice
@usbody.com  
This site is updated daily. All components manufactured are listed 
on this site. (If you don't see your parts listed, they are not available.) 

© Copyright 1987-date 
® U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc.
8823 Van Fleet Road Riverview Florida 33578