(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names and headings is for the sole purpose of identification.
 

This site has moved...    Enter here.

                                   
W - Window
SWB - Short Wheel Base
LWB - Long Wheel Base
Drag Pack includes: Light Weight Cab shell (no floor), L/W Door Shells, L/W OPFE & L/W
                                Bedsides.

47-54 Chevrolet/GMC Truck
Year	Description	Part #	Cost ea.
47-54	Front Bumper (Chrome)	4140-000-472	$139.

47-54 Chevy Truck  Part Pictures
All Items are American Made Fiberglass Components

                                        

3 Window Cab                                                                                Click for Cab Installation 47-53 Cab Features:  - One Piece Outer shell construction - with a few well hidden mold seams.  - Smooth, easy to prep and paint, gray sandable exterior gellcoat finish.  - Aluminum plate reinforced firewall & door hinge areas provides the necessary strength for     proper support of factory doors & hardware.  - Marine Grade Pressure treated floor support beams are sealed into the fiberglass and covered     with black lacquer finish.
5 Window Cab                                                                                   Click for Cab Installation 47-53 Cab cont'd  - The unit arrives bare without dash, doors or any mechanical or electrical devices.  - Headliner is supplied and comes with a smooth paintable gellcoat interior finish.     (Comes  separately  and requires professional installation.)   - Detailed cowl vent allows for quick, easy opening. . . there is even a gutter to drain the     collecting water  - Light Weight Model comes with out floor and firewall - This unit is solely intended for serious     racing applications.  Tube chassis and metal interior work is required. (Approx. weight 50 - 70#) Note:   Cabs - although strong, straight, rust free & reliable - are not the project for the average "Joe".  They are intended for the serious "Ground Up Builder" who has the time, money & experience to do the job correctly.   All safety concerns must be taken up with the chassis shop involved with the project.     Once finished these cabs look exceptional and should just about last forever, however, sit down and Please give some serious thought before ordering........We prefer that our customers be confident & educated in the amount of work required to complete this project and secure in the choice that you make.
Click for Tilt Instructions                           47-53 Front End  Features:  - Heavy Duty version - comes complete with hinge kit - click above for all the "How To" information.  - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.  - Smooth 90° roll into wheel well openings, generally extends in a full  ¾".  - This model fits 47-54 trucks but requires the use of the 47-53 grill shell.  - Headlight blanks require opening to install light bowl and trim.  - The units do come with mold flashing - which must be faired in before preparing for paint.                                      - Light Weight Version - is intended for racing applications and does not come with a hinge kit.      - These unit generally only weigh in at approx 30#  +/- .   NOTE:  When ordering Light Weight version truck racing components are "Special Order" and              Non Returnable.  IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Mud Bog" racing have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact and mud load) and usually weigh  10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Mud Bog units.
47-54 Stock Hood  Features:  - Smooth gray gellcoat    exterior finish.   - Complete with rolled side    edges and center trim.  - Only available in Light     Weight Lift Off design.	47-53 Front Fender  Features:  - Smooth gray gellcoat exterior    finish.   - Smooth 90° roll into wheel well.  - Drilling required for installation.  - Removal of flashing required    before paint prep.	47-54 Stepside Fender  Features:  - Smooth gray gellcoat exterior    finish - Black Lacquer    fiberglass texture inner.  - Smooth 90° roll into wheel well  - Rear flange holes come closed    and require back drilling for    correct alignment.
47-54 Stepside Bed (Short Wheel Base Box - 115" w.b.)   (Long Wheel Base Box 122.7" w.b.) H/D Features:  - Double panel side walls, with a smooth gray gellcoat inner and outer finish.  - Hollow sealed stake pocket - can be opened if desired for original appearance.  - Design for use and abuse with heavy Marine Grade PT under floor reinforcements - which can    support the same weight load as the original bed.  - Gellcoated Fiberglass floors - recessed 3/4" to allow for the installation of "Aftermarket" Bed    Wood Kits.  - Black lacquer over fiberglass texture underneath the bed floor and on the forward side of the back    splash.  - Side flange is angled and does not have the curled design of the original bed (Due to compound    curve & fiberglass mold limitations.)  - Installation time (after removal of original box ) 1-2 hours.   NOTE:    To install - simply drill thru the bed and the under floor reinforcements and thru bolt it in place with O.D washers.  It may be necessary to drill a new mounting hole through the existing frame.  Drilling - sanding and possible notching of under floor braces may be required for correct installation of your NEW and IMPROVED, RUST FREE, DENT FREE  bed assembly.  (Ground wire required for electrical).
47-53 Dash Blank  Features:  - Smooth gray gellcoat finish.  - Detailed face & glove box area. 47-53 SWB Running Board  Features:  - Smooth gray gellcoat finish.  - Clean unribbed design.  - Reinforced for daily use.	47-54 Door - Hinge Type  H/D Features:  - Smooth gray gellcoat finish both inside and out.  - Accepts original hinge, latch & regulator hardware.  - Double wall posts support upper window and track.  - Windows come blanked in and must be opened during     installation.  - Coremat® reinforced outer skin reduces "print thru".  - Power window kits can be used to install one piece glass.  - Original felts can be epoxied in the door post and side track.  - Door is supplied bare with no glass, mechanism, tracks or    hardware.                                                       Click for Additional Door Info

© Copyright 1987-date 
® U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc. 9009 South East C.R. 325 Hampton Florida 32044